Leadshine 2-phase Classic Analog Stepper Drive AM882 DC20-80V 0.1-8.2A New

Leadshine AM882 2-phase Classic Analog Stepper Drive DC20-80V 0.1-8.2A New

PLCAGE: Leadshine 2-phase Classic Analog Stepper Drive AM882 DC20-80V 0.1-8.2A New

The AM882 is a versatility fully digital stepping drive based on a DSP with advanced control algorithm. The AM882 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives in the markets. Its unique features make the AM882 an ideal solution for applications that require low-speed smoothness.

 

The AM882 builds the *sensorless stall detection function to eliminate the cost of feedback device and cabling. Apart from the auto configuration, it has extra 16 selectable built-in auto-configuration parameters which are best match to Leadshine stepping motors.

 

*Note: At present the AM882 only detect motor stall when running speed >300RPM.

 

Features:

*Sensorless tall detection, eliminates cost of feedback device and cabling(>300RPM)

*Anti-Resonance, provides optimum torque and nulls mid-range instability

*Motor auto-identification and parameter auto-configuration technology, offers optimum responses with different motors

*Built-in auto-configuration parameters for 16 Leadshine stepping motor

*Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance

*Microstep resolutions programmable, from full-step to 102,400 steps/rev

*Supply voltage up to +80 VDC, Output current programmable, from 0.1A to 8.2A

*Pulse input frequency up to 200 KHz

*TTL compatible and optically isolated input

*Automatic idle-current reduction and software configured reduction rate

*Suitable for 2-phase and 4-phase motorsOver-voltage, over-current, phase-error protections

*Support PULSE/DIRECTION and CW/CCW modes

*Over-voltage, over-current, phase-error protections

 

Specifications:

Parameters	AM882
	Min	Typical	Max	Unit
Output current	0.1	-	8.2 (5.86 RMS)	A
Supply voltage	+20	+68	+80	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	200	kHz
Isolation resistance	500	-	-	Mohm

 

Applications:

Suitable for a wide range of stepping motors, from NEMA frame size 17 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the AM882 an ideal solution for applications that require both low-speed smoothness and high speed performances.

 

Other hot items of this Leadshine stepper drives for above applications:

AM882	Leadshine 2-phase Classic Analog Stepper Drive AM882 DC20-80V 0.1-8.2A New
M415B	Leadshine 2-phase Classic Analog Stepper Drive M415B DC18-40V 0.21-1.5A New
M542	Leadshine 2-phase Classic Analog Stepper Drive M542 DC20-50V 1.0-4.2A New
M550	Leadshine 2-phase Classic Analog Stepper Drive M550 DC20-50V 1.2-5.0A New
M752	Leadshine 2-phase Classic Analog Stepper Drive M752 DC20-75V 1.8-5.2A New
M760	Leadshine 2-phase Classic Analog Stepper Drive M760 DC20-75V 1.45-6.0A New
M860	Leadshine 2-phase Classic Analog Stepper Drive M860 DC24-80V 2.4-7.2A New
M880A	Leadshine 2-phase Classic Analog Stepper Drive M880A DC24-80V 2.8-7.8A New
MA860H	Leadshine 2-phase Classic Analog Stepper Drive MA860H DC24-80V 2.4-7.2A New