Leadshine 120W brushed DC servo set (drive DCS810 + motor DCM50207D-1000) New

Leadshine 120W brushed DC servo set (drive DCS810 + motor DCM50207D-1000) New

PLCAGE: Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New

Introductions:

The DCS810 is a digital DC servo driver developed with DSP and high efficient MOSFET technologies. In position control, it's easy for the end users to change stepping drivers to the DCS810 without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drivers. In low power motion control applications, performances of DC servo systems using the DCS810 are better than those of digital AC servo systems in velocity, precision, noise, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810 stays at the price line of stepping driver, namely far lower than those of AC servo drivers.

Compared to the DCS810S, the DCS810 can accept differential control signals and differential encoder feedback signals, offering better anti-interference performances. Compared to the DB810A, parameter visible tuning tools make the DCS810 much easier to tune.

The DCS810 is very easy to tune and all parameters are visible. Parameter visible tuning tools, including Pro Tuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements.

Features:

*18-80VDC, 0-20A, 20-400W. 

*Based on DSP control technology and high smooth servo control algorithm. 

*Parameter visible tuning tools, including Pro Tuner and STU. 

*Feedback resolution X4 encoder line count. 

*Position Following error lock range adjustable 

*Position error can be eliminated to 1 count, and Velocity error can be eliminated to the Desired Velocity* 0.3% 

*Electronic gear ratio from 1/255 to 255 

*Built-in motion controller for self-test with trapezoidal velocity profile 

*Support PUL/DIR and CW/CCW control signals 

*Opto-isolated inputs, support single-ended and differential signals 

*10 latest errors self-record function  

*Over-current, over-voltage, under-voltage, phase error, encoder error, position following error protections

*Small size, surface-mount technology

Specifications:

Parameters	Min	Typical	Max	Unit
Peak output current	0	-	20	A
Supply voltage	+18	-	+80	VDC
Logic signal current	7	10	15	mA
Pulse input frequency	0	-	500	kHz
Isolation resistance	500			MΩ
Current provided to encoder	-	-	50	mA

Matching motors:

Drive number	DCS303	DCS810	DCS810S
Motors	18-30VDC brush DC servo motors with single-ended encoder, power up to 90W	18-80VDC brush DC servo motors with differential encoder, power up to 400W	18-80VDC brush DC servo motors with single-ended encoder, power up to 400W

Applications:

Suitable for a wide range of equipments and instruments such as mini type

engraving machines, jet-ink machines, etc. It performs better in equipments desired

for low noise, high velocity, high precision and high reliability

Other hot items of this Leadshine Brushed servo drives for above applications:

DCS303	Leadshine Micro-size Brushed DC Servo Drive DCS303 DC18-30V Cont. 3A Peak 15A for 5-90W Brush DC Servo Motor New
DCS810	Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New
DCS810S	Leadshine Single-ended Brushed DC Servo Drive DCS810S DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New

 

PLCAGE: Leadshine Brushed DC Servo Motor DCM50207D-1000 30.3VDC 120W 2900 rpm Differential 1000-Line Encoder Screw Mounted New

 

Introductions:

Leadshine DCM50202A is a high quality 54mm DC brush servo motors with a 1,000-line differential-ended encoder. The motors are ideal for cost sensitive applications. Built with high quality materials, it moves very quietly and smoothly with high precision and very little motor heating. It has been widely implemented in many OEM applications.

Features:

*Reliable industrial quality

*High performance, Low cost

*Rated voltage:24 VDC, Rated power: 50W

*54mm frame size

*3500 RPM rated speed / 4600 RPM peak

*4000 CPR (1000-line) increamental encoder 

Specifications:

Parameters	Symbol	Units	DCM50202A	DCM50205	DCM50207
Continuous Torque (Max)	TC	N.m	0.15	0.25	0.35
Peak Torque (Stall)	TPK	N.m	0.76	1.59	2.90
No-load Speed	SNL	rpm	4600±10%	4000±10%	3600±10%
Rated Speed	SR	rpm	3500	3400	2900
Rotor Inertia	JM	kg.m2	1.62 x 10-5	3.11 x 10-5	4.73 x 10-5
Winding Temperature	θMAX	°C	155 (Max)	155 (Max)	155 (Max)
Thermal Impedance	RTH	°C /watt	9.00	7.3	4.98
Weight (Plus Encoder)	WM	G	694	1182	1338
Length (Plus Encoder)	L1	mm	129±2	161±2	196±2
Rated Voltage	E	V	24	24	30.3
Rated Current	I	A	1.79	2.95	3.94
Torque Constant	KT	N.m/A	48 x 10-3	52 x 10-3	80 x 10-3
Resistance	RT	Ω	2.52	0.8	0.9
No-load Current	INL	A	0.45	0.5	0.45
Peak Current (Stall)	IP	A	13.9	21.6	32.6
Encoder Resolution	-	steps/rev.	500/1000	500/1000	500/1000

Applications:

The DCM5xxxx series brushed DC servo motors are widely used in inkjet printers, medical equipment, measuring devices, engraving machines, electronic packing equipment and so on. Particularly suited to the applications requiring minimal vibration, super-low noise, high precision and high speed.

Other hot items of this Leadshine Brushed servo motors for above applications:

DCM50202A-1000	Leadshine Brushed DC Servo Motor DCM50202A-1000 24VDC 50W 3500 rpm Single-ended Encoder Screw Mounted New
DCM50205-1000	Leadshine Brushed DC Servo Motor DCM50205-1000 24VDC 80W 3400 rpm Single-ended Encoder Screw Mounted New
DCM50207-1000	Leadshine Brushed DC Servo Motor DCM50207-1000 30.3VDC 120W 2900 rpm Single-ended Encoder Screw Mounted New
DCM57202-1000	Leadshine Brushed DC Servo Motor DCM57202-1000 24V 50W 3500 rpm Single-ended Encoder Flange Mounted New
DCM57205-1000	Leadshine Brushed DC Servo Motor DCM57205-1000 24VDC 80W 3400 rpm Single-ended Encoder Flange Mounted New
DCM57207-1000	Leadshine Brushed DC Servo Motor DCM57207-1000 30.3VDC 120W 2900 rpm Single-ended Encoder Flange Mounted New
DCM50202A-500	Leadshine Brushed DC Servo Motor DCM50202A-500 24VDC 50W 3500 rpm Single-ended Encoder Screw Mounted New
DCM50205-500	Leadshine Brushed DC Servo Motor DCM50205-500 24VDC 80W 3400 rpm Single-ended Encoder Screw Mounted New
DCM50207-500	Leadshine Brushed DC Servo Motor DCM50207-500 30.3VDC 120W 2900 rpm Single-ended Encoder Screw Mounted New
DCM57202-500	Leadshine Brushed DC Servo Motor DCM57202-500 24V 50W 3500 rpm Single-ended Encoder Flange Mounted New
DCM57205-500	Leadshine Brushed DC Servo Motor DCM57205-500 24VDC 80W 3400 rpm Single-ended Encoder Flange Mounted New
DCM57207-500	Leadshine Brushed DC Servo Motor DCM57207-500 30.3VDC 120W 2900 rpm Single-ended Encoder Flange Mounted New
DCM50202AD-1000	Leadshine Brushed DC Servo Motor DCM50202AD-1000 24VDC 50W 3500 rpm Differential Encoder Screw Mounted New
DCM50205D-1000	Leadshine Brushed DC Servo Motor DCM50205D-1000 24VDC 80W 3400 rpm Differential Encoder Screw Mounted New
DCM50207D-1000	Leadshine Brushed DC Servo Motor DCM50207D-1000 30.3VDC 120W 2900 rpm Differential Encoder Screw Mounted New
DCM57202D-1000	Leadshine Brushed DC Servo Motor DCM57202D-1000 24V 50W 3500 rpm Differential Encoder Flange Mounted New
DCM57205D-1000	Leadshine Brushed DC Servo Motor DCM57205D-1000 24VDC 80W 3400 rpm Differential Encoder Flange Mounted New
DCM57207D-1000	Leadshine Brushed DC Servo Motor DCM57207D-1000 30.3VDC 120W 2900 rpm Differential Encoder Flange Mounted New
DCM50202AD-500	Leadshine Brushed DC Servo Motor DCM50202AD-500 24VDC 50W 3500 rpm Differential Encoder Screw Mounted New
DCM50205D-500	Leadshine Brushed DC Servo Motor DCM50205D-500 24VDC 80W 3400 rpm Differential Encoder Screw Mounted New
DCM50207D-500	Leadshine Brushed DC Servo Motor DCM50207D-500 30.3VDC 120W 2900 rpm Differential Encoder Screw Mounted New
DCM57202D-500	Leadshine Brushed DC Servo Motor DCM57202D-500 24V 50W 3500 rpm Differential Encoder Flange Mounted New
DCM57205D-500	Leadshine Brushed DC Servo Motor DCM57205D-500 24VDC 80W 3400 rpm Differential Encoder Flange Mounted New
DCM57207D-500	Leadshine Brushed DC Servo Motor DCM57207D-500 30.3VDC 120W 2900 rpm Differential Encoder Flange Mounted New