Brushless DC Servo Motor Dirve Kit 180W Square Flange 6.7A 0.57NM 3000RPM 20~80VDC BLM57180-1000+ACS806

BLM57180-1000+ACS806

Brushless Servo Motor BLM57180-1000

Descriptions

Leadshine designs and manufactures a wide range of high-quality & cost-effective brushless servo motors. Developed in the advanced manufacturing technology and built with high quality materials, Leadshine brushless servo motors have rated voltage from 24 VDC to 220VAC and rated power of 25 W to 1500 W. For standard motors, they are integrated with 1,000 or 2,500 line incremental encoders, have continuous speed of 3,000 RPM and 4000 RPM peak speed. For high volume OEM customers, Leadshine also offers customizations to meet special requirements such as customized shafts, brakes, etc. When powered by servo drives from Leadshine or third-party, they can run very smoothly and quietly with high precision, excellent torque performance, and very little heating.

Electrical Specifications Applications

Model	BLM57180-1000
Rated Voltage(VDC)	36
Rated Power(W)	180
Rated Torque (N.M)	0.57
Peak Torque(N.M)	1.71
Rated Speed(RPM)	3000
Rated Current(A)	6.7
Peak Current(A)	20
Torque Const.(N.M/A)	0.085
Back EMF Const. (V/RPM)	8.9
Resistance(ohms)	0.9
Inductance(mH)	2
Inertia (kgm2 x 10-4)	0.23
Motor length L(mm)	115
Mass(kg)	1.25

* The standard model is integrated with a 4,000 PPR (1000-line) incremental encoder.

Brushless Servo Drive ACS806

Genneral Introduction

Leadshine designs and manufactures high performance brushless servo drives powering a wide range of servo motors from 25-1,500 W. High performance EL5 series brushless servo drives adopts Leadshines’s advanced control algorithm, and offers a lot of advanced features for excellent performance. The economic ACS series brushless servo drives are 32-bit DSP based, capable of driving brushless servo motors up to 400W to the peak speed of 4,000 RPM with high precision.

Eletric lectrical Specifications (Tj = 25oC/77oF)

Parameters	ACS806
	Min.	Typical	Max.	Unit
Peak output current	0	-	18	A
Continue output current	0	-	6	A
Supply voltage	+18	-	+80	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	600	kHz
Isolation resistance	500			Mohm
Current provided to encoder	-	-	100	mA