BLM57090-1000 |Leadshine 180W brushless DC servo motor 36VDC 3.45A original new

BLM57090-1000 |Leadshine 180W brushless DC servo motor 36VDC 3.45A original new

Description

Built with high quality materials, Leadshine BLM57090-1000 is a 180W brushless DC servo motor at industrial quality. BLM57090-1000 can provide smooth movement with low noise and motor heating in your motion control system. BLM57090-1000 is integrated with a 4,000 PPR (1000-line) incremental encoder.
When driven by Leadshine's AMT offered Leadshine brushless servo drives, it can output the high torque you need at continuous speed from 1 rpm to 3000 rpm. At the cost even lower than many stepper systems on the market, this solution is ideal to upgrade your system from steppers to servos, or from brushed DC servos to brushless Servos.

Features

NEMA 23 frame size

4000 CPR (1000-line) increamental

90W rated power

36 VDC rated voltage

41 oz-in rated torque / 123 oz-in peak

3000 RPM rated speed / 4000 peak

0.250-inch shaft

A, B signals

Quick acceleration

Accuracy to 1 count

High accuracy; smooth movement; quiet movement

Specifications 

Model:	BLM57090-1000
Frame Size:	NEMA 23
Shaft Size:	0.250-inch
Continuous Torque:	41 Oz-In
Peak Torque:	123 Oz-In
Rated Power:	90 Watts
Rated Speed:	3000 RPM
Peak Speed:	4000 RPM
Rated Voltage:	36 VDC
Rated Current:	3.45 A
Peak Current:	10.35 A
Encoder Resolution:	4000 CPR
Back EMF:	8.8 V/kRPM
Torque Constant:	11.87 oz-in / A
Inductance:	4.1 mH
Resistance:	1.35 Ohms
Rotor Inertia:	0.001685 oz-in-sec2
Pole Pairs:	2
Shaft Size:	0.250 Inch
Winding connection:	Delta
Hall Sensor:	120 degree
Radial Play:	0.025 mm
Axial Play:	0.025 mm@460g
Radial Load:	75N@20mm from the flange
Axial Load:	15N
Isolation Level:	B
Isolation resistance:	100M ohms
Isolation Strength:	500VDC for one minute
Length:	3.93 inches
Weight:	1.65 lbs

Mechanical Specification

Unit:  mm

1 inch = 25.4 mm