CNC DSP Closed-Loop Stepper Drive 8A 30-100VDC Matching 86mm NEMA34 motor HBS86H Leadshine

HBS86H 2-phase Hybrid Servo Drive 30-90VDC 8.2A Peak original brand new

Description

The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system.

Feature

HBS86H 2-phase Hybrid Servo Drive

20-70VAC or 30-90VDC, 8.2A Peak

No Tuning, Nulls loss of Synchronization

Closed-loop, eliminates loss of synchronization

Broader operating range – higher torque and higher speed

 Reduced motor heating and more efficient

Smooth motion and super-low motor noise

Do not need a high torque margin

No Tuning and always stable

Fast response, no delay and almost no settle time 

High torque at starting and low speed, high stiffness at standstill

Lower cost

Applications

The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. Its great feature of fast response and no hunting make it ideal for applications such as bonding and vision systems in which rapid motions with a short distance are required and hunting would be a problem. And it is ideal for applications where the equipment uses a belt-drive mechanism or otherwise has low rigidity and you don't want it to vibrate when stopping.

Specifications

Electrical Specifications

Parameter	Min	Typical	Max	Unit
Input Voltage	20	36	50	VDC
Output Current	0	-	8.0(Peak)	A
Pulse Input Frequency	0	-	200	kHz
Logic Signal Current	7	10	16	mA
Isolation Resistance	500	-	-	MΩ

Operating Environment

Cooling	Natural Cooling or Forced cooling
Operating Environment	Environment	Avoid dust, oil fog and corrosive gases
	Storage Temperature	-200C- 650C (-40F- 149 ) 0F
	Ambient Temperature	00C - 500C (320F- 1220F)
	Humidity	40%RH-90%RH
	Operating Temperature (Heat Sink)	700C (1580F) Max
Storage Temperature	-200C- 650C (-40F -149 ) 0F
Weight	580g (9.88oz)

Mechanical Specifications