DVPDNET-SL PLC 500kbps DeviceNet master communication module Delta New

DVPDNET-SL Delta PLC 500kbps DeviceNet master communication module Original brand new

Introduction

- Supports Group 2 server device and Group 2 only server device.

- Supports DeviceNet Master mode and Slave mode.

- Supports EDS file configure in ElinkConfigurator software.

- Supports network establishing all kinds of IO connections: polled, bit-strobe, change of state and cyclic.

- Supports explicit connection via Predefined Master/Slave Connection Set. (explicit message)

- Offers 380 bytes for I/O input data and 380 bytes for I/O output data.

Specifications

DeviceNet Connection

Interface	Removable connector (5.08mm)
Transmission method	CAN
Transmission cable	2-wire twisted shielded cable with 2-wire bus power cable and drain
Electrical isolation	500VDC

Communication

Message type	I/O polled, bit-strobe, change of state/cyclic
Baud rates	125 Kbps; 250 Kbps; 500 Kbps
Product code	64
Product type	12
Vendor ID	799 (Delta Electronics Inc.)

Electrical Specification

DeviceNet	Module power voltage: All other power derived from PLC controller power supply
	Network power input: 11 ~ 25V DC; Current: less than 50mA (25V DC)

Environment

Noise immunity	ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV, Analog & communication I/O: 1KV Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
Environment	Operation: 0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2 Storage: -40 ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)
Vibration/shock resistance	Standard: IEC1131-2, IEC 68-2-6 (TEST Fc)/IEC1131-2 & IEC 68-2-27 (TEST Ea)

Product Profile

 Applications

Spinning machine, conveyer belt (rotation speed control), winding machine (tension control).