AGP3200-A1-D24 HMI 3.8" 320?40 DC24V with Ethernet New

AGP3200-A1-D24 HMI 3.8" 320×240 DC24V with Ethernet New

AGP3200-A1-D24  

specifications:

Model	AGP3200-A1-D24
Display Type	Monochrome Amber/Red LCD
Display Size	3.8"
Resolution	320 x 240 pixels (QVGA)
Dot pitch	W0.24 x H0.24 mm [W0.01 x H0.01 in.]
Effective Display Area	W78.8 x H59.6 mm [W3.10 x H2.35 in.]
Display Colors	Monochrome (8 Levels)
Backlight	Amber/Red LED (User non replaceable parts. Factory replacement required.)
Brightness Control	16 Levels (Adjusted with the touch panel)
Contrast Control	8 Levels (Adjusted with the touch panel)
Backlight Service Life	50,000 hrs. or more (continuous operation at 25centigrade degree before backlight brightness decreases to 50%)
Language Fonts	Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters) ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes	Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts Stroke font: 6 to 127 pixel fonts Image font: 8 to 72 pixel fonts
Font Sizes	Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
8 x 16 dots	40 char. x 15 rows
16 x 16 dots	20 char. x 15 rows
32 x 32 dots	10 char. x 7 rows
8 x 8 dots	40 char. x 30 rows
Application Memory	FLASH EPROM 6 MB*1
Data Backup	SRAM 320KB (uses lithium battery)*2
Clock Accuracy	65 sec/month (deviation at room temperature and power is OFF)*3
Touch Panel Type	Resistive Film (analog)
Touch Panel Resolution	1,024 x 1,024
Touch Panel Service Life	1,000,000 times or more
Serial (COM1)	RS-232C/422/485 Asynchronous Transmission Data Length: 7 or 8 bit Parity: none, Even or Odd Stop Bit: 1 or 2 bit Data Transmission Speed: 2,400 bps to 115.2 kbps Connector: D-Sub9 (plug)
Ethernet (LAN)	IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular jack (RJ-45) x 1
USB (TYPE-A)	Conforms to USB1.1 (TYPE-A) x 1 Power Supply Voltage: DC 5 V ±5 % Output Current: 500 mA or less Communication Distance: 5 m or less

General specifications:

Model	AGP3200-A1-D24
Rated Input Voltage	DC 24V
Input Voltage Limits	DC 19.2 to 28.8V
Allowable Voltage Drop	2 ms or less
Power Consumption	13 W or less
In-Rush Current	60 A or less
Voltage Endurance	AC 1,000V, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance	DC 500 V, 10 MΩ or more (between charging and FG terminals)
Surrounding Air Temperature	0 to 50 centigrade degree
Storage Temperature	-20 to 60 centigrade degree
Ambient Humidity	10 to 90 % RH (Wet bulb temperature: 39 centigrade degree or less - no condensation.)
Storage Humidity	10 to 90 % RH (Wet bulb temperature: 39 centigrade degree or less - no condensation.)
Dust	0.1 mg/m³ or less (non-conductive levels)
Pollution Degree	For use in Pollution Degree 2 environment
Atmosphere	Free of corrosive gases
Air Pressure (altitude range)	800 to 1,114 hPa (2,000 m [6,561ft.] above sea level or less)
Vibration Resistance	IEC/EN61131-2 compliant 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.] 9 to 150 Hz Fixed acceleration: 9.8 m/s² X, Y, Z directions for 10 cycles (100 min)
Concussion Resistance	IEC/EN61131-2 compliant 147 m/s², X, Y, Z directions for 3 times
Noise Immunity	Noise Voltage: 1,000 Vp-p Pulse Duration: 1 µs Rise Time: 1 ns (via noise simulator)
Electrostatic Discharge Immunity	Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Grounding	Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure	Equivalent to IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)*4
Installation Configuration	Embedded panel
Cooling Method	Natural air circulation
Weight Approx.	0.4 kg [0.9 lb] or less (display unit only)
External Dimensions	W130 x H104 x D40 mm [W5.12 x H4.09 x D1.57 in.]
Panel Cut Dimensions	W118.5 x H92.5 mm [W4.67 x H3.64 in.], Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*5