E30S4-100-3-N-24 AUTONICS Encoder NEW

E30S4-100-3-N-24 AUTONICS Encoder NEW

AUTONICS Encoder E30S4-100-3-N-24

 

Features?

Mini shaft type Rotary encoder (D : 30mm)Convenient mountingEasy installation at narow spaceSmall inertia momentPower source : 5VDC, 12-24VDC ±5%Various output types : Totem pole/ NPN open collector/ Voltage/ Line driver

Specification?

Item			Diameter? 30mm shaft type Incremental Rotary encoder
Resolution(P/R)			100?200?360?500?1000?1024? 3000 (Not indicated type is available to customize)
Electrical specification	Phase difference of output		Output between A and B phase : T/4 ?T/8 (T=1cycle of A phase)
	Control output	Totem pole output	•Low Load current : Max.30mA?Residual voltage : Max.0.4VDC •High Load current : Max.10mA?Output voltage : Min.(Power supply-1.5)VDC
		NPN open collector output	Load current : Max.30mA?Residual voltage : Max.1VDC
		Voltage output	Load current : Max.10mA?Residual voltage : Max.0.4VDC
		Line driver output	Low  Load current : Max.20mA?Residual : Max.0.5V High  Load current : Max.-20mA?Output voltage : Min.2.5V
	Response time (Rise/ Fall)	Totem pole output	Max.1μs	•Measuring condition  Cable length:2m? I sink=Max.20mA
		NPN open collector output	Max.1μs
		Voltage output	Max.1μs(5VDC:Output resistance 820Ω)?Max.2μs(12-24VDC:Output resistance 4.7kΩ)
		Line driver output	Max.0.5μs
	Max. Response frequency		180kHz
	Current consumption		Max.60mA(disconnection of the load)?Line driver output:Max.50mA(disconnection of the load)
	Insulation resistance		Min.100MΩ(at 500VDC)
	Dielectric strength		750VAC 50/60Hz for 1 minute(Between all terminals and case)
	Connection		Cable outgoing type? 200 mm cable outgoing connector type
Mechanicalspecification	Starting torque		Max.20gf'cm(0.002N'm)4
	Moment of inertia		Max.20g'cm2(2X10kg'm2)
	Shaft loading		Radial : Max.2kgf?Thrust : Max.1kgf
	Deviation of shaft position		Radial : Max.0.1mm?Thrust : Max.0.2mm
	Max. allowable revolution		(Note1) 5000rpm
Vibration			1.5mm amplitude at frequency of 10-55Hz in each of X?Y?Z directions for 2hours
Shock			Max.50G
Ambient temperature			-10—70?(at non-freezing status)?torage:-25—85?
Ambient humidity			35-85%RH?torage: 35-90%RH
Protection			IP50(IEC specification)
Cable			(Note2) 5P?(Line driver:8P)5mm?Length:2m?Shield cable(Basic)
Accessory			4mm coupling
Weight			Approx.80g
Approval			(Except Line driver output)