E40HB8-600-3-T-24 AUTONICS Encoder NEW

E40HB8-600-3-T-24 AUTONICS Encoder NEW

AUTONICS Encoder E40HB8-600-3-T-24

 

Features?

ø40mm shaft type rotary encoder. Easy installation at narrow space. Small inertia moment. Power source : 5VDC, 12-24VDC  ±5% Various output types : Totem pole/ NPN open collector/ Voltage/ Line driver

Specifications:

Item			Diameter Ø40mm shaft type Incremental Rotary encoder
Resolution(P/R)			*1?*2? *5?10?*12?15?20?23?25?30?35?40?45? 50? 60? 75?100?120?150?192?200?240? 250?256?300?360?400?500? 512? 600? 800?1000?1024?1200?1500?1800?2000?2048? 2500?3000?3600? 5000 (Not indicated type is available to customize)( Note1)
Electrical specification	Phase difference of output		Output between A and B phase : T/4?T/8: (T?1cycle of A phase)
	Control output	Totem pole output	•Low Load current : Max.30mA? Residual voltage : Max. 0.4VDC •High Load current : Max.10mA? Output voltage : Min.(Power supply-1.5)VDC
		NPN open collectoroutput	Load current : Max.30mA ?Residual voltage : Max. 0.4VDC
		Voltage output	Load current : Max.10mA?Residual voltage : Max. 0.4VDC
		Line driver output	Low Load current : Max .20mA? Residual : Max.0.5VHigh Load current : Max . -20mA? Output voltage : Min.2.5V
	Response time (Rise/ Fall)	Totem pole output	Max.1μs	•Measuring condition Cable length : 2m?Isink? Max .20mA
		NPN open collectoroutput	Max.1μs
		Voltage output	Max.1μs
		Line driver output	Max.0.5μs
	Max. Response frequency		180kHz
	Current consumption		Max. 60mA(disconnection of the load)? Line driver output:Max. 50mA(disconnection of the load)
	Insulation resistance		Min. 100MQ(at 500VDC)
	Dielectric strength		750VAC 50/60Hz for 1 minute(Between all terminals and case)
	Connection		Cable outgoing type?200mm cable outgoing connector type
Mechanicalspecification	Starting torque		Shaft Type : Max.40gf.cm(0.004N.m)? Holl Type : Max. 50gf.cm(0.005N.m)
	Moment of inertia		Max.40g.cm2(2x40-6kg.m2)
	Shaft loading		Radial : Max.2kgf? Thrust : Max.1kgf
	Deviation of shaft position		Radial : Max. 0.1mm? Thrust : Max. 0.2mm
	Max. allowable revolution		(Note2)5000rpm
Vibration			1.5mm amplitude at frequency of 10 -55Hz in each of X? Y? Z directions for 2 hours
Shock			Max. 50G
Ambient temperature			-10 -70?(at non-freezing status)? Storage:-25 -85?
Ambient humidity			35-85%RH? Storage: 35-90%RH
Protection			IP50(IEC specification)
Cable			5P?5mm? Length : 2m? Shield cable(Line driver output : 8P? 5mm )
Accessory			6mm coupling standard?8mm coupling (Option) [Applied only for shaft typel
Weight			Approx. 120g
Approval			(Except Line driver output)