No comment |
>
Control System >
PLC >
Delta PLC >
DVP06XA-H3 Delta PLC 4 channel input 2 channel output 16-bit resolution Analog Module Original brand newDVP06XA-H3 Delta PLC 4 channel input 2 channel output 16-bit resolution Analog Module Original brand new
FeaturesFour channels on DVP04DA-H3 are able to receive four pieces of 16-bit digital data from a CPU module, and convert them into analog signals (voltages or currents). Users can read data from the module or write data into the module by means of the instruction FROM/TO in a DVP-EH2/EH3 series PLC. There are 49 control registers in the module, and they are 16-bit registers. Whether the output signals are voltage outputs or current outputs depends on the wiring. The voltage output range is + - 10VDC. (The resolution is 312.5uV.) The current output range is 0~20 mA. (The resolution is 0.625uA).
Specifications
Analog-to-digital conversion
Voltage input
Current input
Supply voltage
24VDC (20.4VDC~28.8VDC) (-15%~+20%)
Number of channels
4 channels
Analog input range
+ -10V
+ - 20mA
Coversion range
+ -32,000
+ - 32,000
Resolution
16 bits (1LSB=312.5uV)
15 bits (1LSB=0.625uA)
Input impedance
Above 1M Ohm
250 Ohm
Overall accuracy
25°C/77°F: + - 0.5% of the input within the range
0~55°C/32~131°F: + - 1% of the input within the range
Response time
1ms
Isolation
The internal circuit is isolated from the analog areas, and the channels are not isolated from one another.
Average function
Users can store the numbers of values averaged in
CR#2~CR#5. Range: K1~K20.
Self-diagnosis
Upper/Lower limit detection/Channel
Digital-to-analog conversion
Voltage output
Current output
Number of channels
2 channels
Analog output range
-10V~+10V
0~20mA
Data range
-32,000~+32,000
0~32,000
Resolution
16 bits (312.5uV)
15 bits (0.625uA)
Input impedance
0.5 Ohm or below
Overall accuracy
25°C/77°F: + - 0.5% of the input within the range
0~55°C/32~131°F: + - 1% of the input within the range
Response time
1ms
Maximum output current
20mA
/
Permissible load impedance
/
0 ~ 500 Ohm
Isolation
The internal circuit is isolated from the analog areas, and the channels are not isolated from one another.
Protection
The voltage output is equipped with the short circuit protection. However, users must notice that a long-term short circuit will damage the internal circuit. The current output can be an open circuit.
Connection with a DVP-PLC CPU
The modules are numbered according to their distances from the CPU module. The numbers start from 0 to 7. Eight modules at most can be connected, and they do not occupy digital inputs/outputs.
Rated maximum power consumption
24VDC (20.4VDC~28.8VDC) (-15% ~ +20%); 4.5W
An external power supply supplies the DC voltage.
Operation/Storage
Operation: 0°C~55°C (temperature); 50~95% (humidity); pollution degree 2
Storage: -25°C~ 70°C (temperature), 5~95% (humidity)
Vibration/Shock resistance
International standards IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea)
Product Profile & Dimension
No comment |