No comment |
AUTONICS Encoder E50S8-75-6-L-5
Features?
Suit for Angle, Position, Revolution, Speed, Acceleration, distance detection. Power source : 5VDC, 12-24VDC ±5% Reasonable price
Specifications:
Item | Diameter ø50mm shaft type Incremental Rotary encoder | |||
Resolution(P/R) | *1? *2?* 5?10?*12? 1 5?20? 2 3?25? 30? 35? 40? 45? 50? 60? 75?100?120? 1 50? 1 92?200? 2 40? 250? 2 56? 300? 360? 400? 500? 512? 600? 800?1000? 102 4?1200? 1 500? 1 800?2000? 20 48? 2500? 3000? 3600? 5000 (Not indicated type is available to customize)( Note1) | |||
wlectrical specification | Output phase | A? B? Z phase(Line driver : A? A? B? B? Z? Z phase) | ||
Phase difference of output | Output between A and B phase : T/4?T/8: (T?1cycle of A phase) | |||
Control output | Totem pole output | •Low Load current : Max.20mA? Residual voltage : Max.0.5VDC •High Load current : Max. -20mA? Output voltage : Min.(Power supply-1.5)VDC | ||
NPN open collector output | Load current : Max. 30mA? Residual voltage : Max.0.4VDC | |||
Voltage output | Load current : Max.10mA? Residual voltage : Max.0.4VDC | |||
Line driver output | Low Load current : Max .20mA? Residual : Max.0.5VHigh Load current : Max . -20mA? Output voltage : Min.2.5V | |||
Response time (Rise/ Fall) | Totem pole output | Max.1μs | •Measuring condition Cable length : 2m?Isink= Max .20mA | |
NPN open collector output | Max.1μs | |||
Voltage output | Max.1μs | |||
Line driver output | Max.0.5μs | |||
Max Response frequency | 180kHz | |||
Current consumption | Max. 60mA(disconnection of the load)? Line driver output:Max. 50mA(disconnection of the load) | |||
Insulation resistance | Min. 100MΩ(at 500VDC) | |||
Dielectric strength | 750VAC 50/60Hz for 1 minute(Between all terminals and case) | |||
Connection | Cable outgoing type? 200 mm cable outgoing connector type | |||
Mechanicalspecification | Starting torque | (Note2) Max. 70gf.cm(0.007N.m) | ||
Moment of inertia | Max. 80g.cm2(8X10-6kg.m2) | |||
Shaft loading | Radial : Max.10kgf? Thrust : Max.2.5kgf | |||
Deviation of shaft position | Radial : Max. 0.1mm? Thrust : Max. 0.2mm | |||
Max allowable revolution | (Note3)5000rpm | |||
Vibration | 1.5mm amplitude at frequency of 10 -55Hz in each of X? Y? Z directions for 2 hours | |||
Shock | Max. 75G | |||
Ambient temperature | -10 -70?(at non-freezing status)? Storage:-25 -85'? | |||
Ambient humidity | 35-85%RH? Storage: 35-90%RH | |||
Protection | IP50(IEC specification) | |||
Cable | 5P?5mm? Length : 2m? Shield cable(Line driver output : 8P? 5mm ) | |||
Accessory | 8mm coupling bracket | |||
Weight | Approx.275g | |||
Approval | (Except Line driver output) |
E50S8-75-6-L-5 AUTONICS Encoder NEWAUTONICS Encoder E50S8-75-6-L-5
Features?
Suit for Angle, Position, Revolution, Speed, Acceleration, distance detection. Power source : 5VDC, 12-24VDC ±5% Reasonable price
Specifications:
Item
Diameter ø50mm shaft type Incremental Rotary encoder
Resolution(P/R)
*1? *2?* 5?10?*12? 1 5?20? 2 3?25? 30? 35? 40? 45? 50? 60? 75?100?120? 1 50? 1 92?200? 2 40? 250? 2 56? 300? 360? 400? 500? 512? 600? 800?1000? 102 4?1200? 1 500? 1 800?2000? 20 48? 2500? 3000? 3600? 5000 (Not indicated type is available to customize)( Note1)
wlectrical specification
Output phase
A? B? Z phase(Line driver : A? A? B? B? Z? Z phase)
Phase difference of output
Output between A and B phase : T/4?T/8: (T?1cycle of A phase)
Control output
Totem pole output
•Low Load current : Max.20mA? Residual voltage : Max.0.5VDC
•High Load current : Max. -20mA? Output voltage : Min.(Power supply-1.5)VDC
NPN open collector output
Load current : Max. 30mA? Residual voltage : Max.0.4VDC
Voltage output
Load current : Max.10mA? Residual voltage : Max.0.4VDC
Line driver output
Low Load current : Max .20mA? Residual : Max.0.5VHigh Load current : Max . -20mA? Output voltage : Min.2.5V
Response time (Rise/ Fall)
Totem pole output
Max.1μs
•Measuring condition Cable length : 2m?Isink= Max .20mA
NPN open collector output
Max.1μs
Voltage output
Max.1μs
Line driver output
Max.0.5μs
Max Response frequency
180kHz
Current consumption
Max. 60mA(disconnection of the load)? Line driver output:Max. 50mA(disconnection of the load)
Insulation resistance
Min. 100MΩ(at 500VDC)
Dielectric strength
750VAC 50/60Hz for 1 minute(Between all terminals and case)
Connection
Cable outgoing type? 200 mm cable outgoing connector type
Mechanicalspecification
Starting torque
(Note2) Max. 70gf.cm(0.007N.m)
Moment of inertia
Max. 80g.cm2(8X10-6kg.m2)
Shaft loading
Radial : Max.10kgf? Thrust : Max.2.5kgf
Deviation of shaft position
Radial : Max. 0.1mm? Thrust : Max. 0.2mm
Max allowable revolution
(Note3)5000rpm
Vibration
1.5mm amplitude at frequency of 10 -55Hz in each of X? Y? Z directions for 2 hours
Shock
Max. 75G
Ambient temperature
-10 -70?(at non-freezing status)? Storage:-25 -85'?
Ambient humidity
35-85%RH? Storage: 35-90%RH
Protection
IP50(IEC specification)
Cable
5P?5mm? Length : 2m? Shield cable(Line driver output : 8P? 5mm )
Accessory
8mm coupling bracket
Weight
Approx.275g
Approval
(Except Line driver output)
No comment |