E6C3-AG5C 360P/R encoder

Absolute outer diameter φ50 (solid type) encoder
  
Durability and ease of use!
? the use of sealed bearings,
The IP65f drip oil structure.
? improve the performance of the bearing resistance of the Ministry of load.
Radial 80N axial 50N
? metal plate, in order to achieve a higher impact resistance.
? PLC and cam positioning combination to achieve the best angle control.

Ratings / Performance

Power voltage: DC12V-10% ~ +15% 24V pulse (pp) less than 5%
Current consumption * 1: 70mA or less
Resolution 2 (pulses / rotation): 256,360 720,1,024
Output Mode: Gray 2 into
Output Type: NPN open collector output
Output capacity: the applied voltage: DC30V following synchronous current: 35mA or less Residual voltage: 0.4V (at sink current of 35mA)
Output rise, fall time: 1μs below (cable length 2m, synchronous current 35mA)
The highest response frequency * 3: 20kHz
Logic Negative logic: (H = "0", L = "1")
Direction of rotation * 4: from the shaft side of the CW direction (increase output code from the shaft side of the right turn)
Strobe pulse signal:NO
Positioning signal:NO
Parity signal:NO
Starting torque: 10mN • m (room temperature), 30mN • m (low temperature)
(Axis to allow the force):
Radial  80N
Axial   50N
Allow the maximum rotational speed: 5,000 r / min.
Ambient temperature range: Operating: -10 to +70 ° C to save: -25 to +85 ° C (not freezing)
Humidity Range: work, save: the 35 ~ 85% RH (non-condensing)
 Insulation resistance: 20MΩ or more (500 VDC megger) between charging the Ministry as a whole and housing
 Between the resistance voltage Voltage AC500V, 50/60Hz, 1min, charging the Ministry as a whole and housing
 Vibration (durable): 10 ~ 500Hz complex amplitude of 2mm 150 m/s2, X, Y, Z directions 3 times scan time 11min
 The impact of (durable): 1,000 m/s2 the X, Y, and Z directions for three times
 Protective structure: the specifications of the IEC IP65 (JEM specifications IP65f {drip, anti-oil}) * 5
 Connection: connector connection type * 7 Pre-wired (standard cable length 1m)
Housing: aluminum
 Body: aluminum
 Shaft: Aluminum
 Weight (packed mode): about 300g
 Accessories: manual

Note:
* 1 When power flows through the updraft of about 6A. (Time: about 0.8ms)
* 2 The code is as follows.