E6CP-AG5C 256P/R encoder

E6CP-AG5C 256P/R OMRON encoder

Shaft shape: the absolute outer diameter φ50 (Universal)
  
Absolute and incremental price
Can be used as a machine limit signal
? high accuracy to detect a variety of automatic mechanical movement time
? the Yin Gelei code output, will not read out the error
? plastic body, so the weight is very light

Ratings / Performance

Shaft shape: DC12V-10% ~ 24V +15% pulse (pp) less than 5%
Current consumption * 1: 90mA or less
Resolution (rotation): 256 (8)
Output mode: binary 2
Output Type: Open collector output
Output capacity: external voltage: DC28V following synchronous current: 16mA or less Residual voltage: 0.4V or less (at sink current of 16mA)
The highest frequency response * 2: 5kHz
Logic: Negative logic (H = "0", L = "1")
Accuracy: ± 1 ° below
Direction of rotation: CW (from the shaft side look for the right rotation) increased output code
Output rise. Fall time: the 1μs following (to control the output voltage of 16V, load resistance of 1kΩ, the output wire 2m ??or less)
Starting Torque: 1mN • m
Moment of inertia of the following: 1 × 10-6kg • m2
(Axis allows the force)
Radial: 30N
Axial: 20N
Allow the highest rotation number: 1,000 r / min.
Ambient temperature range: Action: 10 ~ +55 ° C, save: -25 to +85 ° C (with no icing • condensation)
Ambient humidity range: action, save: 35 ~ 85% RH (without condensation)
Insulation resistance: 20MΩ or more (500 VDC megger) between charging the Ministry as a whole and housing
Voltage AC500V 50/60Hz 1min charge between the Department as a whole and the shell withstanding voltage;
Vibration (durable): 10 ~ 55Hz, 1.5mm complex amplitude of the X, Y, Z each direction 2h
The impact of (durable): 500 m/s2 the X, Y, and Z directions for three times
To protect the constructor *: IEC standard IP50
Connection: Pre-wired (standard cable length 2m)
Housing: ABS
Body: polycarbonate
Axis: SUS416
Installation accessories: iron sub-lead-zinc-plated
Weight (packaged): about 200g
Attachment: Coupler (connector connection type), Servo Mounting Bracket manual

 

Note:
* 1 When power flows through the updraft of about 8A. (Time, maximum response speed of about 0.3ms)

* 2 power according to the resolution
The highest frequency response requirements.

Therefore, when the rotation exceeds the maximum response speed, you can not semaphores track.
* (3) water, oil can not be protected.