FC100 DANFOSS Inverter Dedicated To The Ventilation Heating And Cooling Applications

FC100 DANFOSS Inverter Dedicated To The Ventilation Heating And Cooling Applications

Overview:
Danfoss VLT ® AQUA Drive is a dedicated inverter for water supply and wastewater treatment applications.The VLT ® AQUA variable frequency with a variety of powerful standard and optional features, and minimizes the total cost of ownership of water supply and wastewater treatment applications.The Danfoss machine, regardless of series, can be used in constant pressure water supply.

Power range:
200-240 V ..... 0.25 kW - 45 (kW)
380-480 V ..... 0.37 kW-1000kW
525-600 V ..... 0.75 kW - 90 kW
525-690 V ..... 45 kW - 1,2 MW

Three-phase:
3 * 200-240V ... 0,25-45kW
3 * 380-480V ... 0,37-1000kW
3 * 525-600V ... 0,75-90kW
3 * 525-690V 11-1200kW

Single phase:
1 * 200-240V 1,1-22kW
1 * 380-480V 7,5-37kW

Attachment:
IP20/chassis, IP21/NEMA 1, IP55/NEMA 12 and IP66/NEMA 4X

Dedicated specially designed adaptive PID controller for the water industry:
Adaptive PID controller, the drive can monitor the feedback inverter adjust the action.Therefore, the implementation of accurate and stable operation of the system.

Pipe fill mode:
Pipeline fill the controlled (closed loop).Eliminate water hammer, burst water pipes or gas mixed

The end of the working curve function can detect pipeline rupture and leak:
This feature detects breaks and leakage, the pump running at the end of the working curve inverter will alarm and stop the pump or perform other pre-set action.

Dry pump protection, reduce maintenance costs:
The VLT ® AQUA Drive based on internal frequency / power determination of the status of ongoing assessment of the operation of the pump.

Multi-pump controller:
Built-in multi-pump controller can control up to three fixed main pump.

Motor rotation:
The built-in logic control functions can be realized with a prepared two pump rotation.The opening of the standby pump to prevent pump corrosion, while the built-in timer to ensure that the working hours of each pump and wear roughly the same.

Flow compensation:
The flow compensation feature flow to reduce the pressure set point, which saves energy.

Start / stop speed order more:
The startup speed the more you can order the pump quickly accelerated to the minimum value of the normal operating speed range, to avoid the pump speed too long to run the bearings and mechanical seal damage.Sensor pressure and flow control.

Security:
The VLT ® AQUA Drive converter with safe parking option that complies with EN 954-1, Category 3 installation requirements.This feature prevents the drive from starting unintended.

Attachment:
Using the VLT ® AQUA Drive, you can according to their needs matching a variety of accessories.For more information, please refer to the operating instructions.

Options:
Variety of bus communication, user settings, and other options can be plug and play.

Display options:
Local Control Panel LCP (graphical and digital)
LCP cable, 3 meters
Remote mounting kit for Local Control Panel (LCP)

Application options:
External 24 V power supply card

Fieldbus options:
PROFIBUS DP V1 (MCA 101)
Profisafe-Stop (MCA 103)
DeviceNet (MCA 104)
CAN open-loop (MCA 105)
Ethernet over IP (MCA 121)

I / O options:
General purpose I / O (MCB 101)
Relay Option (MCB 105)
Amplification of multi-pump control card (MCO-101)
Advanced multi-pump control card (MCO-102)
Encoder Input (MCB 102)
Analogue input option (MCB109),
External 24V DC power supply option (MCB-107)

Filters:
Harmonic Filter (AHF 005/010 MCE) Sine wave filter (MCC 101) dU / dt filter (MCC 102)

Other accessories:
IP21/NEMA1 Kit
USB cable used to connect a PC
Harmonic filters connected to the PC