FC301P7K5T4E20H2XGC DANFOSS FC301 Series 7.5kw Inverter

FC301P7K5T4E20H2XGC DANFOSS FC301 Series 7.5kw Inverter

Overview:
The VLT FC300 VLT AutomationDrive is based on modular open technology platform so that it has the extraordinary ability to adapt and programmability.
It can be configured and easy to operate interface to support the local language and character.
In the VLT ® AutomationDrive series, we use the intelligent plug-and-play technology and unmatched reliability, inverter operation as simple as children's games.The Danfoss machine, regardless of series, can be used in constant pressure water supply.

Power range:
0.25 - 37 kW (200 - 240 V)
0.37 - 800 kW (380 - 500 V)
0.75 - 75 KW (525 - 600V)
37 kW - 1.2 MW (525 - 690V)

Attachment:
The drive meets requirements for enclosure class IP 20/Chassis. Optional IP21/NEMA 1, IP55/NEMA 12, IP 54/NEMA12 or IP66 NEMA 4x.

Smart logic controller:
The VLT ® AutomationDrive the standard to provide a safe stop function (for EN 954-1 Category 3 installed).This feature prevents the drive from starting unintended.

Security:
The VLT ® AutomationDrive is inverter with secure parking option that complies with EN 954-1, Category 3 installation requirements.This feature prevents the drive from starting unintended

Hot swap the LCP:
Local Control Panel (LCP) can be run when the plug.Through the control panel, you can easily set transmitted from an inverter (or PC setup software from the installation) to another inverter.

Intelligent thermal management:
There are two cooling methods, they have their own advantages.Forced convection cooling: fan the cold wind to the aluminum heat sink to remove heat.Does not touch the electronic components to facilitate cleaning of the cooling channels.The cooling plate cooling: External cooling through the back of the aluminum shell.Duct cooling: cold wind from the control room or outside in the cooling heat sink does not touch the electronic components

Attachment:

Using the VLT ® AutomationDrive is the FC 302, you can wide selection of accessories according to their needs.For more information, please refer to the operating instructions.

Options:
For bus communication, synchronization, user settings, and other options can be plug and play.

Display options:
Graphical Local Control Panel (LCP102)
Digital Local Control Panel (LCP101)
LCP panel mounting kit

Application options:
External 24 V power supply card

Fieldbus options:
PROFIBUS DP V1 (MCA 101) Profisafe-Stop (MCA 103)
DeviceNet (MCA 104)
CAN open-loop (MCA 105)
Ethernet over IP (MCA 121)

I / O options:
General purpose I / O (MCB 101)
Encoder Input (MCB 102)
Parser input (the MCB 103)
Relay Option (MCB 105)
Safety of the PLC I / O (MCB 108)
PTC Thermistor Card (MCB 112)

Transmission control options:
Drive controller card (MCO 305)
Synchronization control card (MCO 350)
With control card (MCO 351)
Center winding card (MCO 352)

Brake:
Braking resistor for the resistor is installed accessories and installation box

Filters:
Harmonic Filter (AHF 005/010 MCE)
Sine wave filter (MCC 101)
dU / dt filter (MCC 102)

Other accessories:
IP21/NEMA 1 package
Profibus adapter Sub-D9 connector
Decoupling of the fieldbus cable board
USB cable used to connect a PC