GYS500DC2-T2A Servomotor

Product Description:
1. The FALDIC-W is installed with a high-resolution 131072 pulse encoder. Higher resolutions reduce rotation fluctuation and achieve smooth machine motion at low speeds.
2. This is a tool installed in the loader to be equipped with a personal computer, which analyzes the “resonance frequencies” inherent in each machine to make effective use of the “vibration suppressing control function,” the “Notch Filter,” etc.
3. Continuous reciprocation is supported in addition to JOG operation in a single direction. You can easily check the performance of the machine by a test operation and the effective torque by rough actual operation before preparing the host controller.

Features? 

Motor type	GYS500DC2 -T2	GYS101DC2 -T2	GYS201DC2 -T2	GYS401DC2 -T2	GYS751DC2  -T2
Rated output [kW]	0.05	0.1	0.2	0.4	0.75
Rated torque [N·m]	0.159	0.318	0.637	1.27	2.39
Max. torque [N·m]	0.478	0.955	1.91	3.82	7.17
Rated speed [r/min]	3000
Max. speed [r/min]	5000
Moment of inertia [kg·m2]	0.0192×10-4	0.0371×10-4	0.135×10-4	0.246×10-4	0.853×10-4
Rated current [A]	0.85	0.85	1.5	2.7	4.8
Max. current [A]	2.55	2.55	4.5	8.1	14.4
Winding insulation class	Class B
Operation duty type	Continuous
Degree of enclosure protection	Fully closed, self-cooled (IP67, excluding the shaft sealing and connectors)
Terminals (motor)	With 0.3 m flexible leads and connectors
Terminals (encoder)	With 0.3 m flexible leads and connectors
Overheat protection	Not provided (The servo amplifier detects temperature.)
Mounting method	By securing motor flange IMB5 (L51), IMV1 (L52), IMV3 (L53)
Shaft extension	Straight shaft with a key
Paint color	N1.5
Encoder	17-bit serial encoder (Incremental)
Vibration level	V5 or below
Installation place, altitude, Environment	For indoor use, 1000 m or below, locations without corrosive or flammable gases, oil mist and dust
Ambient temperature, humidity	-10 to +40 °C, 90 % RH or below (without condensation)
Vibration resistance [m/s2]	49
Mass [kg]	0.45	0.55	1.2	1.8	3.4