Omron E3X-NA11 Photoelectric Switch New

Omron E3X-NA11 Photoelectric Switch New

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574-88333153
We will quote you our best price to you in 24hours.

Description:

Realized the highest power  and precision in the world.
Capable of stable detection in dusty,  oily environments or of minute objects.

Easy Operation

Quick-Tuning installed

By only two clicking operation, sensor optimizes light intensity and sets threshold value automatically.
It is also helpful when light intensity reaches saturation levels.

One key = One function

Easy operation by 'One key=One function' and the comfortable 'Huge' buttons. No complication.

Specifications?

Type	Digital display and direct key setting	Bar display and adjuster setting
	Standard models	Standard models	High-speed detection models	Water-resistant models
Model	E3X-SD[]	E3X-NA[]	E3X-NA[]F	E3X-NA[]V
Light source (wavelength)	Red, 4-element LED (625 nm)			Red LED (680 nm)
Power supply voltage	12 to 24 VDC ±10%, ripple (p-p): 10% max.
Power consumption/ Current consumption	960 mW max. (Power supply voltage: 24 V, Current consumption: 40 mA max.) (Power supply voltage: 12 V, Current consumption: 80 mA max.)	960 mW max. (Current consumption: 40 mA max.)
Control output	Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.) Light-ON/Dark-ON mode selector	Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1 V max.) Light-ON/Dark-ON mode selector.
Response time	Operate or reset: 200 μs max. *1		Operate: 20 μs max. Reset: 30 μs max.	Operate or reset: 200 μs max. *1
Sensitivity adjustment	UP/DOWN direct key setting, teaching with/without a workpiece, automatic teaching	8-turn sensitivity adjuster (with indicator)
Protection circuits	Power supply reverse polarity protection, output short-circuit protection, output reverse polarity protection	Power supply reverse polarity protection, output short-circuit protection
Timer function	---	No timer, OFF-delay timer; or Timer selector (timer time: 40 ms (fixed))
Mutual interference prevention	Up to 5 Amplifiers (optically synchronized) *2		None	Up to 5 Amplifiers (optically synchronized) *2
Ambient illumination	Receiver side Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max.
Number of gang- mounted Amplifiers	16 max. (The ambient temperature specification depends on the number of gang-mounted Amplifiers.)
Ambient temperature range	Operating: Groups of 1 to 3 Amplifiers: - 25 ° C to 55 ° C Groups of 4 to 11 Amplifiers: - 25 ° C to 50 ° C Groups of 12 to 16 Amplifiers: - 25 ° C to 45 ° C Storage: - 30 ° C to 70 ° C (with no icing or condensation)
Ambient humidity range	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ. min. (at 500 VDC)
Dielectric strength	1,000 VAC at 50/60 Hz for 1 minute *3
Vibration resistance	Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance	Destruction: 500 m/s2, for 3 times each in X, Y and Z directions
Degree of protection	IEC 60529 IP50 (with Protective Cover attached)			IEC 60529 IP66 (with Protective Cover attached)
Connection method	Pre-wired (standard cable length: 2 m), or connector
Weight (packed state) *4	Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g