PLC CPU AC220V 24 DI 16 DO transistor KINCO K308-40AT New

Kinco K3 PLC CPU Module CPU308 Series K308-40AT NIB 24 Digital Inputs 16 Transistor Outputs AC85~265V New 

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574- 88333153
We will quote you our best price to you in 24hours.

Specifications:

Model	CPU308
	K308-14AT	K308-40AR	K308-40AX
Technical Specification
CPU	16-Bit Industrial
Execution Speed	Typical Bool Instruction Time: <0.5μS
	Word Operation Time: <48μS
	Arithmetic Operation Time for Integers: <65μS
	Arithmetic Operation Time for Floating Points: <150μS
DI Points	24XDC24V
DO Points	16XDC24V	16XRelay	4XDC24V+12XRelay
User Program Memory	FRAM, 32KB/About 4,000 Steps
Program Backup	Permanent Storage, Without the Need of Battery
Memory Area	Variable storage Area (V Area): 4KB
	System Storage Area (SM Area): 300 Bytes
	Internal Storage Area (M Area): 32 Bytes
Data Retention Characteristic	Configure With the Programming Software: V Area, C (Counter) Area
Retention Mode and Period	Adopt Super Capacitors and Support a Retention Period of Not Less Than 144 Hours Upon Power Failure Under Normal Temperature.
Data Backup Characteristic	Perform Backup Operations VB3648~VB3902 According to User Instructions, 255 Bytes in Total
Backup Mode and Time	FRAM, 255 Bytes in Total (Writing Operation for 10 Billion Times), Permanent Backup
Floating Points	Supported; the Whole V Area Can be Used for Floating Points
Programming Language Supported	Ladder Drawing (LD), Instruction List (IL)
Instruction Set	Basic Instructions: 114; Expansion Instructions: 420
Password Protection	Yes
Max. I/O	Digital Data: 280 in Total (256 DI and 256 DO Respectively);
	Analog Data: 60 in Total (32 AI and 32 AO Respectively)
Counter	256
Operation Mode of Counter	Addition, Subtraction
Counter Range	-32768~32767
Counting Value Retention Function	Yes
Timer	256
	1 ms Time Base: 4
	10 ms Time Base: 16
	100 ms Time Base: 236
High-speed Counter	6 High-Speed Counters
	Where, Single-Phase Counters: 6, With a Maximum Frequency of 30 KHz
	Where, Dual-Phase Counters: 4, with a Maximum Frequency of 20 KHz
Pulse Output	2, PTO (Pulse Train Output)/PWM (Pulse Width Modulation Output);
	Maximum Output Frequency: 20 KHz(Note: the relay output CPU does not have high speed pluse function)
Analog Potentiometer	2, 10-Bit Resolution, Values Corresponding to Internal Registers
Interruption Function	Timing Interruption: 2, 1ms Resolution;
	Timer Interruption: T2/T3, 1ms Resolution;
	Edge Interruption: 4, Rising Edge or Falling Edge Optional;
	High-Speed Interruption, Communication Interruption
Real-time Clock	Yes, With an Error Not Greater Than 2 Minutes/Month Under a Temperature of 25°C
	The user can use the software to set/read: year, month, day, hour, minute, second, week. Standby batteries are used to supply power for the real-time clock upon power failure. Under normal temperature, the retention period of the Real-Time clock upon power failure is not less than 180 days.
Number of Connectable Expansion Modules	15; Regardless of Types
COM Port	2, RS232 or RS485;
	Supported Working Modes: Programming, Modbus-RTU (Master/Slave), Free Protocol
Equipment Connected with COM Port	RS232/RS485: PC (For Programming), Third-Party HMI Panel, Third-Party Serial Communication Equipment (for Example, Instruments, bar code reader, etc.)
Input Power Supply	AC85~265V
Sensor Load Power Supply	DC24V, Max. 500 mA
Dimensions (L*W*H)	200X114X70mm