PLC CPU AC220V 8 DI 6 DO relay KINCO K304-14AR New

Kinco K3 PLC CPU Module CPU304 Series K304-14AR NIB 8 Digital Inputs 6 Relay Outputs AC85~265V New 

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574- 88333153
We will quote you our best price to you in 24hours.

Specifications:

Model	K304
	K304-14AT	K304-14AR	K304-14AX
Technical Specification
CPU	16-Bit Industrial
Execution Speed	Typical Bool Instruction Time: <1μS
	Word Operation Time: <96μS
	Arithmetic Operation Time for Integers: <130μS
	Arithmetic Operation Time for Floating Points: <300μS
DI Points	8XDC24V
DO Points	6XDC24V	6XRelay	3XDC24V+3XRelay
User Program Memory	EEPROM, 8KB
Program Backup	Permanent Storage, Without the Need of Battery//1000 Instructions
Memory Area	Variable Storage Area (V Area): 2KB
	System Storage Area (SM Area): 300 Bytes
	Internal Storage Area (M Area): 32 Bytes
Data Retention Characteristic	Configure with the Programming Software: V Area, C (Counter) Area
Retention Mode and Period	Adopt super capacitors and support a retention period of not less than 144 hours upon power failure under normal temperature.
Data Backup Characteristic	Perform Backup Operations VB1648 ~ VB1775 According to User Instructions, 128 Bytes in Total
Backup Mode and Time	EEPROM (Writing Operation for 1 Million Times) Permanent Backup
Floating Points	Supported; the Whole V Area can be Used for Floating Points
Programming Language Supported	Ladder Drawing (LD), Instruction List (IL)
Instruction Set	Basic Instructions: 55; Expansion Instructions: 251
PasswordProtection	Yes
Max I/O Number	Digital Data: 14 in Total (DI8, DO6);
	Analog Data: None
Counter	64
Operation Mode of Counter	Addition, Subtraction
Counter Range	-32768~32767
Counting Value Retention Function	Yes
Timer	64
	1 ms time Base: 4
	10 ms Time Base: 16
	100 ms Time Base: 44
High speed counter	2 Single/Dual-Phase High-Speed Counters
	Where, Single-Phase Counter with a Maximum Frequency of 20KHz
	Dual-Phase Counter with a Maximum Frequency of 10KHz
Pulse output	2, PTO (Pulse Train Output)/PWM (Pulse Width Modulation Output);
	Maximum Output Frequency: 20 KHz(Note: the elay output CPU does not have high speed pluse function)
Analog Potentiometer	-
Interrupt function	Timing Interruption: 2, 1ms Resolution;
	Timer Interruption: T2/T3, 1ms Resolution;
	Edge Interruption: 4, Rising Edge or Falling Edge Optional;
	High-Speed Interruption, Communication Interruption
Real-time cholck	0
Number of Connectable Expansion Modules	-
COM Port	1, RS232 or RS485;
	Supported Working Modes: Programming, Modbus-RTU (Slave), Free Protocol
Equipment Connected with COM Port	RS232/RS485: PC (For Programming), Third-Party HMI Panel, Third-Party Serial Communication Equipment (For Example, Instruments, Bar Code Reader, etc.)
Input Power Supply	AC85~265V
Sensor Load Power Supply	DC24V, Max. 300 mA
Dimensions (L*W*H)	97X114X70mm