FX3U-485ADP Mitsubishi PLC Communication Special Adapter Original Brand New

 

FX3U-485ADP Mitsubishi PLC Communication Special Adapter Original Brand New

Introduction

The FX3U-485ADP communication special adapter (hereinafter called 485ADP) is a special adapter for RS-485 communication with a terminal block (European type). The 485ADP is an isolated signal exchange unit of RS-485 serial data communication between the PLC and an RS-485 device.

Applicable PLC

Model name	Applicability
FX3U Series PLC	Ver.2.20 or later (from first production)
FX3UC Series PLC	Ver.1.00 or later (from first production)
FX3G Series PLC	Ver.1.00 or later (from first production)
FX3GC Series PLC	Ver.1.40 or later (from first production)

The version number can be checked by monitoring D8001/D8101 as the last three digits indicate it.

Power Supply Specifications

Item	Specification
Current consumption	20mA 5V DC power is supplied from the internal power supply of main unit

Performance Specification

Item	Specification
Transmission standard	Conforming to RS-485/RS-422
Type of isolation	Photocoupler isolation
Transmission distance	Total extension distance: 500m (1640' 5") or less [50m (164' 0") or less if FX2N-485-BD, FX1N-485-BD or FX3U-485-BD, FX3G-485-BD is installed to connected equipment]
Connection method	European type terminal block, AWG 22-20 (when inserting one twisted pair cable), AWG 22 (when inserting two twisted pair cables) Tightening torque: 0.22 to 0.25 N m
Number of occupied I/O points	0 point (This number is not related to the maximum number of input/output points of the PLC.)
Communication method	Half-duplex
Baud rate	Computer Link, Non-Protocol Communication: 300/600/1200/2400/4800/9600/19200/38400 *1  bps
Communication format	N:N network, Parallel Link Computer Link (dedicated protocol: format 1/format 4), Non Protocol
LED display: LED color	LED display: LED color

*1 The FX3G/FX3GC Series PLC and FX3U/FX3UC Series PLC version 2.41 or later

is applicable.

External Dimension and Part Names