Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 42HS03-B(Bipolar) 0.34N.m New

Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 42HS03-B(Bipolar) 0.34N.m New

PLCAGE: Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 42HS03-B(Bipolar) 0.34N.m New

DM320C

Features:

*Anti-Resonance, provides optimum torque and nulls mid-range instability

*Motor self-test and parameter auto-setup technology, offers optimum responses with different motors

*Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance

*Microstep resolutions programmable, from full-step to 102,400 steps/rev(Note1)

*Supply voltage up to +30 VDC

*Output current programmable, from 0.3A to 2.0A( Note1)

*Pulse input frequency up to 70 KHz

*TTL compatible and optically isolated input

*Automatic idle-current reduction

*Suitable for 2-phase and 4-phase motors

*Support PUL/DIR and CW/CCW modes

*Over-voltage, over-current, phase-error protection

Specifications:

Parameters	DM320C
	Min	Typical	Max	Unit
Output current	0.3	-	2.0 (1.43 RMS)	A
Supply voltage	+20	-	+30	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	70	kHz
Isolation resistance	500			MΩ

Applications:

Suitable for a wide range of stepping motors, from NEMA frame size 14 to 23. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the DM320C an ideal solution for applications that require low-speed smoothness.

42HS03 

Features:

*2-phase hybrid step motor

*High torque design

*Standard NEMA 17 dimensions

*Series or parallel and unipolar wiring

*Optimized for microstepping

Specifications:

General

Step Angle	1.8°
Step Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°CMax
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)
Number of Leads	8 except 42HS04(4 leads)

Electric

Model Number

Connection

Holding Torque Oz-in (Nm)

Phase Current (Amps)

Phase Resistance (Ohm)

Phase Inductance (mH)

Rotor Inertia Oz-in-sec2 (g.cm2)

 

42HS03	(Bipolar) Parallel	66.55(0.47)	1.4	2.3±10%	4±20%	0.001164(82)
	(Bipolar) Series	66.55(0.47)	0.7	9.2±10%	16±20%
	Unipolar	48.14(0.34)	1.0	4.6±10%	4±20%

Matching drives:

Model	Match drives
42HSxx	EM402/DM422C

Applications:

Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.

Other stepper sets available in PLCAGE:

DM320C + 35HS01	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 35HS01 0.07N.m New
DM320C + 39HS01	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 39HS01 0.065N.m New
DM320C + 39HS02	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 39HS02 0.22N.m New
DM320C + 42HS02	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 42HS02 0.22N.m New
DM320C + 42HS03	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 42HS03 0.34N.m New
DM320C + 42HS08	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 42HS08 0.8N.m New
DM320C + 57HS06	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 57HS06 0.6N.m New
DM320C + 57HS09	Leadshine 2-phase Stepper Set (Drive + Motor) DM320C + 57HS09 0.9N.m New