Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS03-J(Unipolar) 0.34N.m New

Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS03-J(Unipolar) 0.34N.m New

PLCAGE: Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS03-J(Unipolar) 0.34N.m New

M415B

Features:

*High performance, low cost

*Supply voltage up to +40VDC

*Output current up to 1.5A

*Inaudible 20 KHz chopping frequency

*TTL compatible and optically isolated input signals

*Automatic idle-current reduction

*Mixed-decay current control for less motor heating

*7 selectable microstep resolutions: 1, 2, 4, 8, 16, 32, 64

*Suitable for 2-phase and 4-phase motors

*Protection against power leads(+, -)reversal

*Small size: 86*55*20mm (3.386*2.165*0.787Inch)

Specifications:

Parameters	M415B
Supply voltage	+15~40	VDC
Typical supply voltage	+24~36	VDC
Output current	0.21~1.5	A
Microstep resolutions	1, 2, 4, 8, 16, 32, 64.

Applications:

Suitable for a wide range of stepping motors from NEMA size 16 to 23, which used in various kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, pick-place devices, and etc. It’s specially adapted to the applications desired with low vibration,

high speed and high precision.

42HS03 

Features:

*2-phase hybrid step motor

*High torque design

*Standard NEMA 17 dimensions

*Series or parallel and unipolar wiring

*Optimized for microstepping

Specifications:

General

Step Angle	1.8°
Step Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°CMax
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)
Number of Leads	8 except 42HS04(4 leads)

Electric

Model Number

Connection

Holding Torque Oz-in (Nm)

Phase Current (Amps)

Phase Resistance (Ohm)

Phase Inductance (mH)

Rotor Inertia Oz-in-sec2 (g.cm2)

42HS03	(Bipolar) Parallel	66.55(0.47)	1.4	2.3±10%	4±20%	0.001164(82)
	(Bipolar) Series	66.55(0.47)	0.7	9.2±10%	16±20%
	Unipolar	48.14(0.34)	1.0	4.6±10%	4±20%

Matching drives:

Model	Match drives
42HSxx	EM402/DM422C

Applications:

Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.

Other stepper sets available in PLCAGE:

M415B + 35HS01	Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 35HS01 0.07N.m New
M415B + 39HS01	Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 39HS01 0.065N.m New
M415B + 39HS02	Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 39HS02 0.22N.m New
M415B + 42HS02	Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS02 0.22N.m New
M415B + 42HS03	Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS03 0.34N.m New
M415B + 42HS08	Leadshine 2-phase Stepper Set (Drive + Motor) M415B + 42HS08 0.8N.m New