CNC Stepper motor Drive Kit 2ph 1.8 Degree 6A 12NM NEMA42 110mm 20-50VAC/36-80VDC 110HS12-Z +MA860H

Leadshine NEMA42 110mm 1700oz-in 12N.M 20-50VAC/36-80VDC 2phase Stepper motor Drive kits 110HS12-Z +MA860H 110HS12-Z +MA860H Stepper Motor 110HS12-Z General Specifications Step Angle Accuracy +5%(full step, no load) Temperature Rise 80°CMax Ambient Temperature -10°C -- +50°C Insulation Resistance 100MΩmin.500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.06 Max.(450g-load) Shaft Axial Play 0.08 max.(450g-load) Electric Model No. 110HS12-Z Step Angle 1.8° Phase 2 Phase Holding Torque 12N.M 1700 oz-in NEME Size NEME 42 Motor frame size Frame 110 Current /phase 6A # of leads 4 Motor Weight 6Kg Drive MA860H M Series General Introduction With the adoption of its pioneer "pure sinusoidal current control technology" and the latest "self-adjustment technology", Leadshine M series stepper drives can effectively reduce current ripples and mid-range vibration, enabling different motors to run at optimal performance and with lower heating. They can also eliminate drawbacks of difficulty of driving various motors, such as high heating with smaller inductance motors, low high-speed torque with large inductance motors, poor performance under low voltage, and high motor heating under high voltage. Electrical Specifications Phase Series Models Current(A) Voltage (V) Microstepping Motor adapter Weight(kg) External size (mm) Controlling signal Two phase M MA860H 2.4-7.2 20-50VAC/36-80VDC 2-256,5-200 57,86 0.57 151*97*48 Differential signal M Series Applications Suitable for applications require high reliability, good high speed performance, extremely low cost stepper systems, such as CNC routers, milling or engraving machines, textile equipment, assembly machines, pick-and-place devices, etc. 110HS12-Z Dimension