Leadshine 3-phase Stepper Set (Drive + Motor) 3ND883 + 863S68H 6.8N.m New

Leadshine 3-phase Stepper Set (Drive + Motor) 3ND883 + 863S68H 6.8N.m New

PLCAGE: Leadshine 3-phase Stepper Set (Drive + Motor) 3ND883 + 863S68H 6.8N.m New

3ND883

Features:

*High performance, low noise and lost cost

*Low driver heating and low motor heating

*Supply voltage up to 80 VDC

*Output current up to 8.3A (RMS 5.9A)

*Input signal TTL compatible

*Automatic idle-current reduction

*Suitable for 3-phase stepping motors, including 3 lead and 6 lead motors

*Optically isolated differential input signals, pulse frequency up to 300 KHz

*16 selectable resolutions up to 25600 steps/rev

*DIP switch current setting with 8 different values

*PUL/DIR & CW/CCW modes optional

*Over-voltage, short-voltage, over-current and short-circuit protection

*Small size for easy mounting

Specifications:

Parameters	3ND883
	Min	Typical	Max	Unit
Output current	2.1(1.5A RMS)	-	8.3 (5.9 RMS)	A
Supply voltage	24	68	80	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	300	kHz
Isolation resistance	500	-	-	Mohm

Applications:

Suitable for a wide range of 3-phase stepping motors from NEMA size 17 to 34. It can be used in various kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, and pick-place devices, and etc. It’s extremely suitable for the applications desired with low noise, low vibration, high speed and high precision.

863S68H 

Features:

*3-phase hybrid step motor

*High torque design

*Standard NEMA 34 dimensions

*Delta wiring

*Optimized for microstepping

Specifications:

General

	Step Angle					1.2°
	Step Angle Accuracy					+5%(full step, no load)
	Temperature Rise					80°CMax
	Ambient Temperature					-10°C -- +50°C
	Insulation Resistance					100MΩmin.500VDC
	Dielectric Strength					500VAC for one minute
	Shaft Radial Play					0.06 Max.(450g-load)
	Shaft Axial Play					0.08 max.(450g-load)
Model No.		Step Angle	Holding Torque	Current /phase	Inductance /phase		Resistance /phase	# of leads	Rotor Inertia	Detent Torque	Motor Weight	Motor Length L
		(°)	N.m	A	mH		Ohm		g.cm2	N.cm	Kg	mm
863S22		1.2	2.0	5.0	2.8		0.9	6	1200	-	2.1	73
863S42		1.2	4.0	5.0	4.5		1.35	6	2500	-	3.0	105
863S68H		1.2	6.78	3.5	20		4.5	6	3300	-	3.8	127

Matching drives:

Model	Match drives
863S22	3DM683/3DM883
863S42	3DM683/3DM883
863S68H	3DM683/3DM883

Applications:

Suitable for all kinds of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, laser typesetting, plotter and CNC machine tools, automatic assembly equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.

Other stepper sets available in PLCAGE:

3ND883 + 863S22	Leadshine 3-phase Stepper Set (Drive + Motor) 3ND883 + 863S22 2.2N.m New
3ND883 + 863S42	Leadshine 3-phase Stepper Set (Drive + Motor) 3ND883 + 863S42 4.2N.m New
3ND883 + 863S68H	Leadshine 3-phase Stepper Set (Drive + Motor) 3ND883 + 863S68H 6.8N.m New