Leadshine 2-phase Stepper Set (Drive + Motor) ND1182 + 86HS120 12N.m New

Leadshine 2-phase Stepper Set (Drive + Motor) ND1182 + 86HS120 12N.m New

PLCAGE: Leadshine 2-phase Stepper Set (Drive + Motor) ND1182 + 86HS120 12N.m New

ND1182

Features:

*High quality, cost-effective

*Low motor noise and heating

*Supply voltage up to 150VAC (210VDC)

*Output current up to 8.2A(5.86 ARMS)

*TTL compatible and Opto-isolated inputs

*Automatic idle-current reduction

*Input frequency up to 200KHz

*15 microstep resolutions selectable

*Suitable for 2-phase and 4-phase stepping motors

*DIP switch microstep & current settings

*Support PUL/DIR & CW/CCW modes

Specifications:

Parameters	ND1182
	Min	Typical	Max	Unit
Output current	0.7(0.5A RMS)	-	8.2 (5.86 RMS)	A
Supply voltage	70(100)	110(155)	150(210)	VAC(VDC)
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	200	kHz
Isolation resistance	500			Mohm

Applications:

Suitable for a wide range of stepper motors, from NEMA size 34 to 51. It can be used in various applications such as laser cutters, laser markers, high precision X-Y tables, labeling machines, CNC router, etc. Its unique features make the DM1182 an ideal choice for applications that require both low-speed smoothness and high speed performances.

86HS120

Features:

*2-phase hybrid step motor

*High torque design

*Standard NEMA 34 dimensions

*Series or parallel and unipolar wiring

*Optimized for microstepping

Specifications:

General

Step Angle	1.8°
Step Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°CMax
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)
Number of Leads	8

Electric

Model Number

Phase

Holding Torque Oz-in (Nm)

Phase Current (Amps)

Phase Resistance (Ohm)

Phase Inductance (mH)

Rotor Inertia Oz-in-sec2 (g.cm2)

86HS120

2

12

4.9

1.4

8.7

4000

Matching drives:

Model	Match drives
86HS35	EM705/EM806/DM870/DM1182
86HS45
86HS85	EM705/EM806/DM870/DM1182/ DM2282

Applications:

Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.