Leadshine 2-phase Stepper Set (Drive + Motor) MA860 + 86HS35 3.5N.m New

Leadshine 2-phase Stepper Set (Drive + Motor) MA860 + 86HS35 3.5N.m New

PLCAGE: Leadshine 2-phase Stepper Set (Drive + Motor) MA860 + 86HS35 3.5N.m New

MA860

 

Features:

*High performance, cost-effective

*Supply voltage up to 60VAC or +80VDC

*Output current up to 7.2A

*Self-adjustment technology

*Pure-sinusoidal current control technology

*Pulse input frequency up to 300 KHz

*TTL compatible and optically isolated input

*Automatic idle-current reduction

*15 selectable resolutions in decimal and binary, up to 51,200 steps/rev

*Suitable for 2-phase and 4-phase motors

*Support PUL/DIR and CW/CCWmodes

*Short-voltage, over-voltage, over-current

and short-cicuit protection

Specifications:

Parameters	MA860
	Min	Typical	Max	Unit
Output current	1.8	-	7.2 (5.1 RMS)	A
Supply voltage	18	48	60	VAC
	+24	+68	+80	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	300	kHz
Isolation resistance	500			MΩ

Applications:

Suitable for a wide range of stepping motors, from NEMA size 17 to 43. It can be used in various kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed and high precision.

 

86HS35 

Features:

*2-phase hybrid step motor

*High torque design

*Standard NEMA 34 dimensions

*Series or parallel and unipolar wiring

*Optimized for microstepping

Specifications:

General

Step Angle	1.8°
Step Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°CMax
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)
Number of Leads	8

Electric

 

 

 

 

Model Number

Connection

Holding Torque Oz-in (Nm)

Phase Current (Amps)

Phase Resistance (Ohm)

Phase Inductance (mH)

Rotor Inertia Oz-in-sec2 (g*cm2)

 

86HS35	Bipolar (Parallel)	495.6(3.5)	4.0	0.7±10%	3.9±20%	0.0142(1000)
	Bipolar (Series)	495.6(3.5)	2.0	2.8±10%	15.6±20%
	Unipolar	311.52(2.2)	2.8	1.4±10%	3.9±20%

Matching drives:

Model	Match drives
86HS35	EM705/EM806/DM870/DM1182
86HS45
86HS85	EM705/EM806/DM870/DM1182/ DM2282

Applications:

Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.

Other stepper sets available in PLCAGE:

MA860 + 86HS35	Leadshine 2-phase Stepper Set (Drive + Motor) MA860 + 86HS35 3.5N.m New
MA860 + 86HS45	Leadshine 2-phase Stepper Set (Drive + Motor) MA860 + 86HS45 4.5N.m New
MA860 + 86HS85	Leadshine 2-phase Stepper Set (Drive + Motor) MA860 + 86HS85 8.5N.m New
MA860 + 86HS120	Leadshine 2-phase Stepper Set (Drive + Motor) MA860 + 86HS120 12N.m New