Leadshine 2-phase Stepper Set (Drive + Motor) DM856 + 86HS45 4.5N.m New

Leadshine 2-phase Stepper Set (Drive + Motor) DM856 + 86HS45 4.5N.m New

PLCAGE: Leadshine 2-phase Stepper Set (Drive + Motor) DM856 + 86HS45 4.5N.m New

DM856

Features:

*Anti-Resonance, provides optimum torque and nulls mid-range instability 

*Motor auto-identification and parameter auto-configuration technology, offers optimum responses with different motors

*Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance

*Microstep resolutions programmable, from full-step to 102,400 steps/rev

*Supply voltage up to +80 VDC

*Output current programmable, from 0.5A to 5.6A

*Pulse input frequency up to 200 KHz

*TTL compatible and optically isolated input

*Automatic idle-current reduction

*Suitable for 2-phase and 4-phase motors

*Support PUL/DIR and CW/CCW modes

*Over-voltage, over-current, phase-error protection

Specifications:

Parameters	DM856
	Min	Typical	Max	Unit
Output current	0.5	-	5.6 (4.0 RMS)	A
Supply voltage	+20	-	+80	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	200	kHz
Isolation resistance	500			MΩ

Applications:

Suitable for a wide range of stepping motors, from NEMA size 17 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the DM856 an ideal solution for applications that require both low-speed smoothness and high speed performances.

86HS45 

Features:

*2-phase hybrid step motor

*High torque design

*Standard NEMA 34 dimensions

*Series or parallel and unipolar wiring

*Optimized for microstepping

Specifications:

General

Step Angle	1.8°
Step Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°CMax
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)
Number of Leads	8

Electric

Model Number

Connection

Holding Torque Oz-in (Nm)

Phase Current (Amps)

Phase Resistance (Ohm)

Phase Inductance (mH)

Rotor Inertia Oz-in-sec2 (g*cm2)

86HS45	Bipolar (Parallel)	637.2(4.5)	6.0	0.375±10%	3.4±20%	0.01988(1400)
	Bipolar (Series)	637.2(4.5)	3.0	1.5±10%	13.6±20%
	Unipolar	453.12(3.2)	4.2	0.75±10%	3.4±20%

Matching drives:

Model	Match drives
86HS35	EM705/EM806/DM870/DM1182
86HS45
86HS85	EM705/EM806/DM870/DM1182/ DM2282

Applications:

Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.

Other stepper sets available in PLCAGE:

DM856 + 57HS22	Leadshine 2-phase Stepper Set (Drive + Motor) DM856 + 57HS22 2.2N.m New
DM856 + 86HS35	Leadshine 2-phase Stepper Set (Drive + Motor) DM856 + 86HS35 3.5N.m New
DM856 + 86HS45	Leadshine 2-phase Stepper Set (Drive + Motor) DM856 + 86HS45 4.5N.m New
DM856 + 86HS85	Leadshine 2-phase Stepper Set (Drive + Motor) DM856 + 86HS85 8.5N.m New