Leadshine 3-phase Stepper Set (Drive + Motor) 3DM683 + 863S42 4.2N.m New

Leadshine 3-phase Stepper Set (Drive + Motor) 3DM683 + 863S42 4.2N.m New

PLCAGE: Leadshine 3-phase Stepper Set (Drive + Motor) 3DM683 + 863S42 4.2N.m New

3DM683

Features:

*Extra-low motor noise offers excellent quietness

*Anti-Resonance, provides optimum torque and nulls mid-range instability

*Self-test and Auto-configuration technology, offers optimum responses with different motors

*Microstep resolutions programmable, from full-step to 102,400 steps/rev 

*Supply voltage up to +60 VDC 

*Output current programmable, from 0.5A to 8.3A

*Pulse input frequency up to 200 KHz  

*Automatic idle-current reduction

*Supports PUL/DIR and CW/CCW modes

*Suitable for 3/6 leads 3-phase motors

Specifications:

Parameters	3DM683
	Min	Typical	Max	Unit
Output current	0.5	-	8.3 (5.9 RMS)	A
Supply voltage	+20	-	+60	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	200	kHz
Isolation resistance	500			MΩ

Applications:

Suitable for a wide range of stepping motors, from NEMA frame size 17 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the 3DM683 an ideal solution for applications that require both low-speed smoothness and high speed performances.

863S42 

Features:

*3-phase hybrid step motor

*High torque design

*Standard NEMA 34 dimensions

*Delta wiring

*Optimized for microstepping

Specifications:

General

	Step Angle					1.2°
	Step Angle Accuracy					+5%(full step, no load)
	Temperature Rise					80°CMax
	Ambient Temperature					-10°C -- +50°C
	Insulation Resistance					100MΩmin.500VDC
	Dielectric Strength					500VAC for one minute
	Shaft Radial Play					0.06 Max.(450g-load)
	Shaft Axial Play					0.08 max.(450g-load)
Model No.		Step Angle	Holding Torque	Current /phase	Inductance /phase		Resistance /phase	# of leads	Rotor Inertia	Detent Torque	Motor Weight	Motor Length L
		(°)	N.m	A	mH		Ohm		g.cm2	N.cm	Kg	mm
863S22		1.2	2.0	5.0	2.8		0.9	6	1200	-	2.1	73
863S42		1.2	4.0	5.0	4.5		1.35	6	2500	-	3.0	105
863S68H		1.2	6.78	3.5	20		4.5	6	3300	-	3.8	127

Matching drives:

Model	Match drives
863S22	3DM683/3DM883
863S42	3DM683/3DM883
863S68H	3DM683/3DM883

Applications:

Suitable for all kinds of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, laser typesetting, plotter and CNC machine tools, automatic assembly equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.

Other stepper sets available in PLCAGE:

3DM683 + 863S22	Leadshine 3-phase Stepper Set (Drive + Motor) 3DM683 + 863S22 2.2N.m New
3DM683 + 863S42	Leadshine 3-phase Stepper Set (Drive + Motor) 3DM683 + 863S42 4.2N.m New