Stepper Motor Drive 2ph 4A 2.2NM NEMA23 57mm Single shaft 24-50VDC For CNC Engraving Machine 57HS22-A+M542

57HS22-A+M542

Stepper Motor 57HS22-A

General Specifications

Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°C Max
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)

Electric

Model No.	57HS22-A
Step Angle	1.8°
Phase	2 Phase
Holding Torque	2.2N.M 314.28 oz-in
NEME Size	NEME 23
Motor frame size	Frame 57
Current /phase	4.0 A
# of leads	8
Motor Weight	1.1Kg
Motor Length L	80 mm

Drive M542

M Series General Introduction

With the adoption of its pioneer "pure sinusoidal current control technology" and the latest "self-adjustment technology", Leadshine M series stepper drives can effectively reduce current ripples and mid-range vibration, enabling different motors to run at optimal performance and with lower heating. They can also eliminate drawbacks of difficulty of driving various motors, such as high heating with smaller inductance motors, low high-speed torque with large inductance motors, poor performance under low voltage, and high motor heating under high voltage.

Electrical Specifications

Phase	Series	Models	Current(A)	Voltage (V)	Microstepping	Motor adapter	Weight(kg)	External size (mm)	Controlling signal
Two phase	M	M542 V2.0	1.0-4.2	DC(24-50)	2-128,5-125	42,57	0.271	118*75.5*34	Differential signal

M Series Applications

Suitable for applications require high reliability, good high speed performance, extremely low cost stepper systems, such as CNC routers, milling or engraving machines, textile equipment, assembly machines, pick-and-place devices, etc.

57HS22-A Dimension

M542 Dimension

Typical Connection

57HS Electrical Connection