Leadshine 2-phase Stepper Set (Drive + Motor) DM442 + 57HS13 1.3N.m New

Leadshine 2-phase Stepper Set (Drive + Motor) DM442 + 57HS13 1.3N.m New

PLCAGE: Leadshine 2-phase Stepper Set (Drive + Motor) DM442 + 57HS13 1.3N.m New

DM442

 

Features:

*Anti-Resonance, provides optimum torque and nulls mid-range instability

*Motor self-test and parameter auto-setup technology, offers optimum responses with different motors

*Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance

*Microstep resolutions programmable, from full-step to 102,400 steps/rev

*Supply voltage up to +40 VDC

*Output current programmable, from 0.5A to 4.2A

*Pulse input frequency up to 200KHz

*TTL compatible and optically isolated input

*Automatic idle-current reduction(Reduction rate can be software configured)

*Support PUL/DIR and CW/CCW modes

*Over-voltage, over-current, phase-error protections

Specifications:

Parameters	DM442
	Min	Typical	Max	Unit
Output current	0.5	-	4.2 (3 RMS)	A
Supply voltage	+20	-	+40	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	200	kHz
Isolation resistance	500			MΩ

Applications:

Sutible for applications require high performance, extra low motro noise, extra smooth movement stepper systems, such as CNC routers, small and medium size milling or engraving machines, laser machines, lab automation instruments, textile equipment, medical devices, assembly machines, pick-and-place devices, etc.

 

57HS13  

Features:

*2-phase hybrid step motor

*High torque design

*Standard NEMA 23 dimensions

*Series or parallel and unipolar wiring

*Optimized for microstepping

Specifications:

General

Step Angle	1.8°
Step Angle Accuracy	+5%(full step, no load)
Temperature Rise	80°CMax
Ambient Temperature	-10°C -- +50°C
Insulation Resistance	100MΩmin.500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06 Max.(450g-load)
Shaft Axial Play	0.08 max.(450g-load)
Number of Leads	8

Electric

Model Number

Connection

Holding Torque Oz-in (Nm)

Phase Current (Amps)

Phase Resistance (Ohm)

Phase Inductance (mH)

Rotor Inertia Oz-in-sec2 (g.cm2)

 

57HS13	(Bipolar) Parallel	254.88(1.8)	4.0	0.5±10%	2.1±20%	0.006532(460)
	(Bipolar) Series	254.88(1.8)	2.0	2.0±10%	8.4±20%
	Unipolar	184.08(1.3)	2.8	1.0±10%	2.1±20%

Matching drives:

Model	Match drives
57HS04	EM503/EM705/DM556
57HS09
57HS13
57HS22

Applications:

Suitable for all kinds of small automation equipment and instruments, such as: pneumatic marking machine, marking machine, cutting machine, laser marking machine, plotter, small engraving machine, CNC machine tools, handling equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.

Other stepper sets available in PLCAGE:

DM442 + 42HS08	Leadshine 2-phase Stepper Set (Drive + Motor) DM442 + 42HS08 0.8N.m New
DM442 + 57HS09	Leadshine 2-phase Stepper Set (Drive + Motor) DM442 + 57HS09 0.9N.m New
DM442 + 57HS13	Leadshine 2-phase Stepper Set (Drive + Motor) DM442 + 57HS13 6.35N.m New
DM442 + 57HS22	Leadshine 2-phase Stepper Set (Drive + Motor) DM442 + 57HS22 2.2N.m New