3M458 Kinco Stepper Drive 3ph 5.8A 24-40VDC New

3M458 Kinco Stepper Drive 3ph 5.8A 24-40VDC New

Features:

The AC Servo Drive Principle is Used,Providing AC Servo Rotation Characteristics and Three-Phase Sine Wave Current Output;
The Internal Drive DC Voltage Reaches 40V,Which can Provide Better High-Speed;
Supporting Automatic Half Current Function of Motors in Statically Locked Status, which can Greatly Reduce Heat Dissipation of the Motors;
Supporting Subdivision Function up to 10,000 Steps/Revolution. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;
It has Little the Resonance and Creeping Area Common to Stepper Motors.The Output Phase Current can be Set through the DIP Switch,Featuring Very Low Operation Noise, Closing to the AC Servo Level.
Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises. 
The Sine Current Drive Mode is Taken So that the No-Load Start Frequency of a Motor can Reach about 5KHz(100Steps/Revolution).

Specifications:

3M458

Supply Voltage: DC 24V~40V

Output Current(Peak,Unit:A): 3~5.8

Input Current: 6~16mA

Micro Step: 400~10,000

Model	3M458
Supply Voltage	DC 24V ~ 40V
Output Phase Current	3A ~ 5.8A
Control Signal Input Current	6~16mA
Cooling Method	Natural Air Cooling
Operating Environment	Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases
Operating Temperature	-10°C ~ +45°C
Operating Humidity	< 85% (Non-Condensing)
Weight	0.7 Kg

Dimensions: