2M420 Kinco Stepper Drive 2ph 2.5A 24-40VDC New

2M420 Kinco Stepper Drive 2ph 2.5A 24-40VDC New

 

Features? 

The Maximum Supply Voltage can Reach 40V, Which can Provide Better Dynamic Drive Performance;

The Bipolar Constant Current Drive Mode is Taken with a Maximum Drive Current up to 2.5A Per Phase, Which can Drive any Two-Phase Bipolar Hybrid Stepper Motors with a Current Less than 2.5A;

The Drive Output Phase Current of a Motor can be Regulated Through the DIP Switch, to Match Motors of Different Specifications;

A DIP Switch is Used to Set the Automatic Half Current Function of Motors in Statically Locked Status, which can Greatly Reduce Heat Dissipation of the Motors;

A Dedicated Control Chip is Used, with a Maximum of 256/200 Subdivisions. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;

Supporting Offline Function, So that the Output Current of a Motor can be Cut Off If Necessary;

Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises.

Specifications:

2M420

Supply Voltage: DC 24V~40V

Output Current(Peak,Unit:A): 0.3~2.5

Input Current: 6~16mA

Micro Step: 2~256

Model	2M420
Supply Voltage	DC 24V ~ 40V
Output Phase Current	0.3A~ 2.5A
Control Signal Input Current	6~16mA
Cooling Method	Natural Air Cooling
Operating Environment	Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases
Operating Temperature	-10°C ~ +45°C
Operating Humidity	<85% (Non-Condensing)
Weight	0.4 Kg

Dimensions: