Ratio1:20 NEMA34 7A 10NM 1429oz-in L 98mm Gear Reduction Motor+Drive CNC machining

Ratio1:20 NEMA34 7A 10NM 1429oz-in L 98mm Gear Reduction Motor+Drive CNC machining 100HS9850A4-G20+MA860H

 

Appliaction:

 

Inject printers, Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, engraving machine, packaging machinery, CNC numerically-controlled machine tool and transmission.

 

Motor Product Description:

 

Step Angle Accuracy: ±5%(full step, no load)

Resistance Accuracy: ±10%

Inductance Accuracy: ±20%

Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)

Ambient Temperature: -20°C-+50°C

Insulation Resistance: 100MΩ Min.500V DC

Dielectric Strength: 500V AC for one minute

 

Gear Reduction Motor Specifications:

 

Model	100HS9850A4-G12.5	100HS9850A4-G20
Step Angle	1.8	1.8
Rated Current	5A	5A
Rated voltage	3.25V	3.25V
Resistance	0.65ohm	0.65ohm
Holding Torque	10NM	10NM
Inductance	5mh/phase	5mh/phase
Detent torque	24.5N.cm	24.5N.cm
Rotor inertia	2500 g.cm*2	2500 g.cm*2
Motor length	98mm	98mm
Lead wire	4 NO	4NO
Reduction box	104*104*72mm	104*104*72mm
Gear Ratio	1:12.5	1:20
Output shaft diamete	15mm	15mm
Matching Drive	AC18-80V & DC24-110V  7.8A  Drive

 

 

Stepper Drive Specifications:

 

Item	Min	Typical	Max	Unit
Power supply	24	-	110	VDC
	18		80	VAC
Average output current	2	2.5	7.8	A
Logic input current	6	15	30	mA
Impulse response frequency	-	-	100	KHZ
Pulse low level	5	-	1	μS

 

Drive Wiring Description:

 

Signal	Function
PUL	Pulse signal: rising edge, the pulse from low to high is to go a step angle motor
DIR	Direction signal: TTL-level driver to change the direction
OPTO	Optocoupler drive power
ENA	Enable signal: block or allow the drive to work, low-level ban
GND	DC power supply ground
+V	DC power supply positive (typical 24VDC)
A+	Motor Phase A
A-	Motor Phase A
B+	Motor Phase B
B-	Motor Phase B