Ratio1:20 NEMA34 5A 8NM 1143oz-in L 114mm Gear Reduction Motor+Drive CNC machining

 Ratio1:20 NEMA34 5A 8NM 1143oz-in L 114mm Gear Reduction Motor+Drive CNC machining  86HS11450A4-G20+MA860H

Appliaction:

Inject printers, Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, engraving machine, packaging machinery, CNC numerically-controlled machine tool and transmission.

Motor Product Description:

Step Angle Accuracy: ±5%(full step, no load)

Resistance Accuracy: ±10%

Inductance Accuracy: ±20%

Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)

Ambient Temperature: -20°C-+50°C

Insulation Resistance: 100MΩ Min.500V DC

Dielectric Strength: 500V AC for one minute

Gear Reduction Motor Specifications

Model	86HS9850A4	86HS11450A4
Step Angle	1.8	1.8
Rated Current	5A	5A
Holding Torque	6NM	8NM
Motor length	98mm	114mm
Reduction box	104*104*72mm	104*104*72mm
Gear Ratio	1:20	1:20
Output shaft diamete	15mm	15mm
Matching Drive	AC18-80V & DC24-110V  7.8A  Drive

86HS11450A4 dimension:

Stepper Drive Specifications

Item	Min	Typical	Max	Unit
Power supply	24	-	110	VDC
	18		80	VAC
Average output current	2	2.5	7.8	A
Logic input current	6	15	30	mA
Impulse response frequency	-	-	100	KHZ
Pulse low level	5	-	1	μS

Drive Wiring Description

Signal	Function
PUL	Pulse signal: rising edge, the pulse from low to high is to go a step angle motor
DIR	Direction signal: TTL-level driver to change the direction
OPTO	Optocoupler drive power
ENA	Enable signal: block or allow the drive to work, low-level ban
GND	DC power supply ground
+V	DC power supply positive (typical 24VDC)
A+	Motor Phase A
A-	Motor Phase A
B+	Motor Phase B
B-	Motor Phase B