HG-SR702BJ+MR-J4-700B 26A 7KW 33.4NM 2000rpm Brake Oil seal AC Servo Motor Drive Kit with 3M Cable New

HG-SR702BJ+MR-J4-700B 26A 7KW 33.4NM 2000rpm Brake Oil seal AC Servo Motor Drive Kit with 3M Cable New

Servo Motor and Drive: HG-SR702BJ+MR-J4-700B

Motor Specifications:

Servo motor Model HG-SR_		52(B)	102(B)	152(B)	202(B)	352(B)	502(B)	702(B)
Power facility capacity [kVA]		1.0	1.7	2.5	3.5	5.5	7.5	10
Continuous running duty	Rated output [KW]	0.5	1.0	1.5	2.0	3.5	5.0	7.0
	Rated torque [Nm]	2.4	4.8	7.2	9.5	16.7	23.9	33.4
Maximum torque [Nm]		7.2	14.3	21.5	28.6	50.1	71.6	1000
Rated rotation speed		2000[rpm]
Maximum rotation speed		3000[rpm]
Permissible instantaneous rotation speed		3450[rpm]
Rated current [A]		2.9	5.6	9.4	9.6	14	22	26
Maximum current [A]		9.0	17.4	29.1	30.7	44.8	70.4	83.2
Weight [kg]		4.8	6.2	7.3	11	16	20	27
Weight [kg]( With Brake)		6.7	8.2	9.3	17	22	26	33

Drive Specifications:

mode name		MR-J4-700B
Stocked Item		S
Output	Rated Voltage	3-phase 170 VAC
	Rated Current (A)	37.0
Main Circuit Power Supply	Voltage/Frequency	3-phase 200 VAC to 240 VAC, 50/60 Hz
	Rated Current (A)	28.9
	Permissible Voltage Fluctuation	3-phase 170 VAC to 264 VAC
	Permissible Frequency Fluctuation	±5% maximum
Control Circuit Power Supply	Voltage/Frequency	1-phase 200 VAC to 240 VAC, 50/60 Hz
	Rated Current (A)	0.3
	Permissible Voltage Fluctuation	1-phase 170 VAC to 264 VAC
	Permissible Frequency Fluctuation	±5% maximum
	Power Consumption (W)	45
Interface Power Supply		24 VDC ±10% (required current capacity: 0.3 A (including CN8 connector signal))
Load-Side Encoder Interface		Mitsubishi high-speed serial communication
Tolerable Regenerative Power of the Built-in Regenerative Resistor(W)		170
Control Method		Sine-wave PWM control/current control method
Dynamic Brake		Built-in
Protective Functions		Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, under-voltage protection, instantaneous power failure protection, over-speed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection
Fully Closed Loop Control		Available in the future
Safety Function		STO (IEC/EN 61800-5-2)
Communication Function		USB: Connect a personal computer (MR Configurator2 compatible)
Structure (IP Rating)		Force cooling, open (IP20)
Close Mounting		Not possible
Weight (kg)		6.2