FR-E720S-0.75K-CHT VFD input 1 ph 220V output 3 ph 200~240V 5A 0.75KW 0.2~400Hz

FR-E720S-0.75K-CHT VFD  input 1 ph 220V output 3 ph 200~240V 5A 0.75KW 0.2~400Hz

 

FR-E720S-0.75K-CHT 

Specification

Model FR-E720S- ?K(-C)?8		0.1	0.2	0.4	0.75	1.5	2.2
Applicable motor capacity(kW) ?1		0.1	0.2	0.4	0.75	1.5	2.2
Output	Rated capacity(kVA) ?2	0.3	0.6	1.2	2.0	3.2	4.4
	Rated current(A) ?6	0.8(0.8)	1.5(1.4)	3.0(2.5)	5.0(4.1)	8.0(7.0)	11.0(10.0)
	Overload current ranting?3	150% 60s, 200% 3s (inverse-time characteristics)
	Voltage?4	Three-phase 200 to 240V
Power supply	Rated input AC (DC)voltage/frequency	Single-phase 200 to 240V 50Hz/60Hz
	Pemnissible AC (DC)voltage fluctuation	170 to 264V 50Hz/60Hz
	Pemnissible frequency fluctuation	Within ±5%
	Power supply capacity (kVA) ?5	0.5	0.9	1.5	2.5	4.0	5.2
Protective structure(JEM1030)		Enclosed type (IP20)
Cooling system		Self-cooling			Forced air cooling
Approximate mass (kg)		0.6	0.6	0.9	1.4	1.5	2.0

1 The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi 4-pole standard motor.

2 The rated output capacity indicated assumes that the output voltage is 230V for three-phase 200V class and 440V for three-phase 400V class.

3 The % value of the overload current rating indicated is the ratio of the overload current to the inverter's rated output current. For repeated duty, allow time for

the inverter and motor to return to or below the temperatures under 100% load.

4 The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range. However,

the pulse voltage value of the inverter output side voltage remains unchanged at about that of the power supply.

5 The power supply capacity varies with the value of the power supply side inverter impedance (including those of the input reactor and cables).

6 Setting 2kHz or more in Pr. 72 PWM frequency selection to perform low acoustic noise operation in the surrounding air temperature exceeding 40°C (totallyenclosed

structure is 30°C), the rated output current is the value in parenthesis.