ECMA-C30602ES+ASD-A0221-AB Delta 220V 200W 0.64NM 3000RPM 60mm AC Servo Motor Drive kits 2500ppr with 3M cable

ECMA-C30602ES+ASD-A0221-AB Delta 220V 200W 0.64NM 3000RPM 60mm AC Servo Motor Drive kits 2500ppr with 3M cable

 

Motor+Drive: ECMA-C30602ES+ASD-A0221-AB

Package Content:
1* 200W AC servo Motor
1* 200W  AC Servo  Drive
1* 3M Encoder Cable &Power Cable 

1 Motor Specifications

Model	ECMA-C30602ES
Product Name	Electronic Commutation Motor
Servo Type	AC Servo
Name of the Series	ASD-A
Rated Voltage	220V
Sensor Type	2500ppr
Motor Frame Size	60 mm
Type of Shaft Diameter and Oil Seal	Keyway w/o Brake w/o Oil Seal
Standard Shaft Diameter	S=14mm
Rated Power Output	200W
Rated torque (N-m)*1	0.64
Max. torque (N-m)	1.92
Rated Speed	3000 rpm
Max. speed	5000 rpm
Rated current (A)	1.55 A
Max. current (A)	4.65 A
Power rating (kW/s)(without brake)	22.4
Rotor moment of inertia(× 10 -4 kg.m2 ) (without brake)	0.177
Mechanical time constant (ms) (without brake)	0.80
Torque constant-KT (N-m/A)	0.41
Voltage constant-KE (mV/(r/min))	16.0
Armature resistance (Ohm)	2.79
Armature inductance (mH)	12.07
Electrical time constant (ms)	4.30
Insulation class	Class A (UL), Class B (CE)
Insulation resistance	> 100 M  ohm, DC 500 V
Insulation strength	1500V AC, 60 seconds
Weight (kg)  (without brake)	1.2 Kg
Max. radial shaft load (N)	196
Max. thrust shaft load (N)	68
Power rating (kW/s) (with brake)	21.3
Rotor inertia  (× 10-4kg.m2) (with brake)	0.19
Mechanical constant (ms) (with brake)	0.85
Vibration grade (μm)	15
Operating temperature	0~40  degree centigrade
Storage temperature	-10~80  degree centigrade
Operating humidity	20% to 90% RH (non-condensing)
Storage humidity	20% to 90% RH (non-condensing)
Vibration capacity	2.5G
IP Rating	IP65
Approvals	CE  UL

2  Drive Specifications

Model				ASD-A0221-AB
Product Name				AC SERVO Drive
Series				ASD-A
Model Type				2500ppr
Power Supply	Phase / Voltage			Single-phase: 200~255VAC, 50 / 60Hz ±5%
	Continuous Output Current			1.3 Arms
Cooling method				Natural Air Circulation
Encoder Resolution /Feedback Resolution				2500ppr / 10000ppr
Main Circuit Control				SVPWM Control
Tuning Modes				Auto / Manual
Dynamic Brake				Built-in
Position Control Mode		Max. Input Pulse Frequency		Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Open collector)
		Pulse Type		Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
		Command Source		External pulse train / Internal parameters
		Smoothing Strategy		Low-pass and P-curve filter
		Electronic Gear		Electronic gear N/M multiple N: 1~32767, M:1:32767(1/50
		Torque Limit Operation		Set by parameters
		Feed Forward Compensation		Set by parameters
Speed Control Mode		Analog Input Command	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 KΩ
			Time Constant	2.2 us
		Speed Control Range*1		1 : 5000
		Command Source		External analog signal / Internal parameters
		Smoothing Strategy		Low-pass and S-curve filter
		Torque Limit Operation		Set by parameters or via Analog input
		Responsiveness Characteristic		Maximum 450Hz
		Speed Fluctuation Rate *2		0.01% or less at load fluctuation 0 to 100% (at rated speed)
				0.01% or less at power fluctuation ±10% (at rated speed)
				0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation (at rated speed)
Torque Control Mode		Analog Command Input	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 KΩ
			Time Constant	2.2 us
		Command Source		External analog signal / Internal parameters
		Smoothing Strategy		Low-pass filter
		Speed Limit Operation		Parameter Setting or via Analog input
Analog Monitor Output				Monitor signal can set by parameters (Output voltage range: ±8 V)
Communication Interface				RS-232 / RS-485 / RS-422