ECMA-F1221BR3+ASD-A2-1B23-F Delta 220V 11KW 70NM 1500r/min 220mm Keyway AC Servo Motor Drive kits

ECMA-F1221BR3+ASD-A2-1B23-F Delta 220V 11KW 70NM 1500r/min 220mm Keyway AC Servo Motor Drive kits

Motor+Drive: ECMA-F1221BR3+ASD-A2-1B23-F

Package Content:
1* 11KW AC servo Motor
1* 11KW  AC Servo  Drive
Motor and Drive available, if need encoder and power cable, contact us directly .

1 Motor Specifications

Model	ECMA-F1221BR3
Product Name	Electronic Commutation Motor
Servo Type	AC Servo
Name of the Series	A2
Rated Voltage	220V
Encoder Type	incremental type, 20-bit
Motor Frame Size	220 mm
Type of Shaft Diameter and Oil Seal	Keyway(with fixed screw holes) w/o Brake with Oil Seal
Standard Shaft Diameter	S=42mm
Rated Power Output	11000W
Rated torque (N-m)*1	95.4
Max. torque (N-m)	224.0
Rated Speed	1500 rpm
Max. speed	2000 rpm
Rated current (A)	61.5 A
Max. instantaneous current (A)	145.7 A
Power rating (kW/s)	164.6
Rotor inertia  (× 10-4kg.m2)	553
Mechanical constant (ms)	1.23
Torque constant-KT (N-m/A)	1.55
Voltage constant-KE (mV/(r/min))	55.65
Armature resistance (Ohm)	0.018
Armature inductance (mH)	0.45
Electric constant (ms)	24.51
Insulation class	Class A (UL), Class B (CE)
Insulation resistance	> 100 M ohm, DC 500 V
Insulation strength	1.8k Vac, 1 sec
Weight (kg)  (without brake)	86.4 Kg
Radial max. loading (N)	3300
Axial max. loading (N)	1100
Power rating (kW/s) (with brake)	-
Rotor inertia  (× 10-4kg.m2) (with brake)	-
Mechanical constant (ms) (with brake)	-
Vibration grade (μm)	15
Operating temperature	0~40  degree centigrade
Storage temperature	-10~80  degree centigrade
Operating humidity	20% to 90% RH (non-condensing)
Storage humidity	20% to 90% RH (non-condensing)
Vibration capacity	2.5G
IP Rating	IP65
Approvals	CE  UL

2 Drive Specifications

Model			ASD-A2-1B23-F
Product Name			AC SERVO Drive
Series			A2
Model Type			Full-Closed DMCNET
Power	Phase / Voltage		Three-phase 220 VAC
	Permissible Voltage		Three-ephas 200 ~ 230 VAC, -15% ~ 10%
	Continuous Output Current		70 Arms
	Rate Output Power		11000W
Cooling method			Fan Cooling
Encoder Resolution  (Servo Drive Resolution)			Incremental type: 20-bit (1280000 p/rev) ; Absolute type: 17-bit (1280000 p/rev)
Main Circuit Control			SVPWM (Space Vector Pulse Width Modulation) Control
Control Mode			Auto / Manual
Dynamic Brake			External
Position Control Mode	Max. Input Pulse Frequency		Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Open collector)
	Pulse Type		Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
	Command Source		External pulse / Register
	Smoothing Strategy		Low-pass and P-curve filter
	E-gear ratio		E-gear ratio N/M multiple N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
	Torque Limit		Parameter settings
	Feed Forward Compensation		Parameters settings
Speed Control Mode	Analog Command Input	Voltage Range	0 ~ ±10 VDC
		Input Resistance	10 KΩ
		Time Constant	2.2 us
	Speed Control Range*1		1:2000
	Command Source		External analog command / Register
	Smoothing Strategy		Low-pass and S-curve filter
	Torque Limit		Via parameter setting or analog input
	Bandwidth		Maximum 1 kHz
	Speed Accuracy*2		0.01% or less at 0 to 100% load fluctuation
			0.01% or less at ±10% power fluctuation
			0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation
Torque Control Mode	Analog Command Input	Voltage Range	0 ~ ±10 VDC
		Input Resistance	10 KΩ
		Time Constant	2.2 us
	Command Source		External analog command / Register
	Smoothing Strategy		Low-pass filter
	Speed Limit		Via parameter setting or analog input
Analog Monitor Output			Monitor signal can set by parameters (Output voltage range: ±8 V)
Communication Interface			RS-232 / RS-485 / USB