| No comment |
Your Position: Home
> Motion Control System > AC Servo System > Delta > ASD-B2-2023-B Detla AC Sevor Drive 3ph 220V 2kW 13.4A NewASD-B2-2023-B Detla AC Sevor Drive 3ph 220V 2kW 13.4A New
Description
ASD-B2-2023-B Detla AC Sevor Drive 3ph 220V 2kW 13.4A New
Drive Specifications
Model
ASD-B2-2023-B
Product Name
AC SERVO Drive
Corresponding Servo Motor
ECMA- C*1020( )S (S = 22mm)
ECMA- E*1320( )S (S = 22mm)
ECMA- E*1820( )S (S = 35mm)
ECMA-F*1313( )S (S = 22mm)
ECMA-F11318( )S (S = 22mm)
Series
ASD-B2
Rated power
2KW
Power
Supply
Phase / Voltage
Three-phase:170 ~ 255VAC,50/60Hz ±5%
Continuous Output Current
13.4 Arms
Cooling method
Fan Cooling
Encoder Resolution /Feedback Resolution
17-bit (160000 p/rev)
Main Circuit Control
SVPWM Control
Tuning Modes
Auto/Manual
Dynamic Brake
Built-in
Position
Control
Mode
Max. Input Pulse
Frequency
Line driver: Max. 500Kpps (low speed)/Max.4Mpps(high speed) Open collector: Max. 200Kpps
Pulse Type
Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
Command Source
External pulse train
Smoothing Strategy
Low-pass filter
Electronic Gear
Electronic gear N/M multiple N: 1 ~ (2 26 -1)/M:1 ~ (2 31 -1)
1/50 < N/M < 25600
Torque Limit Operation
Set by parameters
Feed Forward Compensation
Set by parameters
Speed
Control
Mode
Analog
Input
Command
Voltage
Range
0 ~ ±10 VDC
Input
Resistance
10 KΩ
Time
Constant
2.2 us
Speed Control Range*1
1 : 5000
Command Source
External analog signal /Internal parameters
Smoothing Strategy
Low-pass and S-curve filter
Torque Limit Operation
Set by parameters or via Analog input
Responsiveness
Characteristic
Maximum 550Hz
Speed Fluctuation Rate *2(at rated speed)
0.01% or less at load fluctuation 0 to 100%
0.01% or less at power fluctuation ±10%
0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation
Torque
Control
Mode
Analog
Command
Input
Voltage
Range
0 ~ ±10 VDC
Input
Resistance
10 KΩ
Time
Constant
2.2 us
Command Source
External analog signal / Internal parameters
Smoothing Strategy
Low-pass filter
Speed Limit Operation
Parameter Setting or via Analog input
Analog Monitor Output
Monitor signal can set by parameters (Output voltage range: ±8 V)
ASD-B2-2023-B external dimension (mm)
