DVP24ES00R2 Delta PLC 100-240VAC 16DI 8DO relay output Original brand new

DVP24ES00R2 Delta PLC 100-240VAC 16DI 8DO relay output Original brand new

introduction

DVP-ES/EX Series provide the main processing units and extension units. The processing units offer 14~60 points and the extension units offer 8~32 points. The maximum input and output can be extended up to 128 points respectively. Also, it can be used on various applications according to input and output points, power supply, digital input and output modules.

Electrical Specifications

Model Item	DVP14ES00_	DVP24ES00_	DVP32ES00_	DVP40ES00_	DVP60ES00_	DVP20EX00_	DVP14ES01_	DVP32ES01_	DVP20EX11_
Power Supply Voltage	100~240VAC (-15%~10%), 50/60Hz +- 5%						24VDC (-15%~10%)
Operation Specification	The PLC start to operate at power supply of 95~100VAC. If the voltage of power supply drops to 70VAC, the PLC will stop. Maximum power loss time is 10ms or less.						Maximum power loss time is 5ms or less.
Fuse	2 A / 250VAC						2 A / 250VAC
Power Consumption	20VA	25VA	30VA	30VA	35VA	30VA	5.5W	8W	8W
DC24V Supply Current	400mA	400mA	400mA	400mA	400mA	400mA	--	--	--
Power Protection	DC24V output short circuit						DC24V input polarity
Voltage Withstand	1500VAC(Primary-secondary), 1500VAC(Primary-PE), 500VAC(Secondary-PE)
Insulation Resistance	>5 M ohm at 500VDC (Between all inputs / outputs and earth)
Noise Immunity	ESD: 8KV Air Discharge EFT: Power Line: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 250V RS: 26MHz~1GHz, 10V/m
Grounding	The diameter of grounding wire cannot be smaller than the wire diameter of terminals L and N (All DVP units should be grounded directly to the ground pole).
Environment	Operation: 0°C ~55°C (Temperature), 50~95% (Humidity), Pollution degree2; Storage: -25°C ~70°C (Temperature), 5~95% (Humidity)
Vibration / Shock Resistance	Standard: IEC1131-2, IEC 68-2-6(TEST Fc)/ IEC1131-2 & IEC 68-2-27 (TEST Ea)
Weight (g)	400	552	580	596	750	536	260	430	386