S8JX-G10024CD Switching Power Supply NEW

S8JX-G10024CD OMRON Switching Power Supply NEW

Product Description:

Flexible Selection of Reliability and Ease of Operation with the S8JX. New Models with Harmonic Current Suppression for a Broader Lineup.

Specifications:

Input specification			100 to 240 V input
Power ratings *1			15 W	35 W
Efficiency			68% min.	73% min.
Input	Voltage *2		100 to 240 VAC (allowable range: 85 to 264 VAC, 80 to 370 VDC *9)
	Frequency *2		50/60 Hz (47 to 450 Hz)
	Current *3	100 V input	0.4 A max.	1 A max.
		200 V input	0.25 A max.	0.6 A max.
	Harmonic current emissions		---
	Leakage	100 V input	0.5 mA max.
	current *3	200 V input	1 mA max.
	Inrush current	100 V input	20 A max.
	(for a cold
	start at 25 °C)
	*3	200 V input	40 A max.
Output	Voltage adjustment range *5		- 10% to 15% (with V. ADJ) (48-V models: ± 10%)
*4	Ripple *3		2% (p-p) max.
	Input variation influence		0.4% max. with AC input voltage
	Load variation influence		0.8% max. (0 to 100% load, rated input voltage)
	Temperature variation influence		0.05%/ ° C max. (at rated input and output)
	Startup time		500 ms max. (up to 90% of output voltage at rated input and output)
	Hold time *3		20 ms min.
Additional	Overload protection *6		105% to 175% of rated load current, voltage drop, intermittent, automatic reset
functions	Overvoltage protection *7		Yes
	Overheat protection		No
	Parallel operation		No (However, backup operation is possible; external diodes required.)
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Protective circuit operation indicator		No
Other	Ambient operating temperature		Refer to the derating curve in Engineering Data on Data Sheet (with no icing or
			condensation).
	Storage temperature		- 25 to 65 ° C (with no icing or condensation)
	Ambient operating humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)
			2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)
			1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2 , 3 times each in ± X, ± Y, ± Z directions
	Output indicator		Yes (Color: Green)
	EMI	Conducted	Conforms to EN 55011 Group 1 Class A and based on FCC Class A *9
		Emissions
		Radiated Emissions	Conforms to EN 55011 Group 1 Class A *9
	EMS	Electrostatic	Conforms to EN61000-4-2
		Discharge
		Radiated	Conforms to EN61000-4-3
		Electromagnetic
		Field
		Electrical Fast	Conforms to EN61000-4-4
		Transient/Burst
		Surge	Conforms to EN61000-4-5
		Conducted	Conforms to EN61000-4-6
		Disturbance
		Voltage Dips/	Conforms to EN61000-4-11
		Short Interruptions
	Approved standards *9		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition)
			cUL Listed: CSA C22.2 No.107.1
			cUR: CSA C22.2 No. 60950-1
			EN/VDE: EN50178 (= VDE 0160) Over voltage category III, EN 60950-1 (= VDE 0805
			Teil 1) (Terminal block: Based on DIN 50274 (VDE 0660-514))
	SEMI		SEMI F47-0200 (200-VAC input)
	Weight *8		250 g max.
Input specification			100 to 240 V input
Power ratings *1			50 W	100 W
Efficiency		5 V Models	76% min.	76% min.
		12 V Models	81% min.	81% min.
		24 V Models	83% min.	83% min.
		48 V Models	82% min.	83% min.
Input	Voltage *2		100 to 240 VAC (allowable range: 85 to 264 VAC, 80 to 370 VDC *9)
	Frequency *2		50/60 Hz (47 to 450 Hz)
	Current *3	100 V input	1.4 A max.	2.5 A max.
		200 V input	0.8 A max.	1.5 A max.
	Harmonic current emissions		---
	Leakage	100 V input	0.5 mA max.
	current *3	200 V input	1 mA max.
	Inrush current	100 V input	20 A max.
	(for a cold
	start at 25 °C)
	*3	200 V input	40 A max.
Output	Voltage adjustment range *5		- 10% to 15% (with V. ADJ) (48-V models: ± 10%)
*4	Ripple *3		2% (p-p) max.
	Input variation influence		0.4% max. with AC input voltage
	Load variation influence		0.8% max. (0 to 100% load, rated input voltage)
	Temperature variation influence		0.05%/ ° C max. (at rated input and output)
	Startup time		500 ms max. (up to 90% of output voltage at rated input and output)
	Hold time *3		20 ms min.
Additional	Overload protection *6		105% to 175% of rated load current, voltage drop, intermittent, automatic reset
functions	Overvoltage protection *7		Yes
	Overheat protection		No
	Parallel operation		No (However, backup operation is possible; external diodes required.)
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Protective circuit operation indicator		No
Other	Ambient operating temperature		Refer to the derating curve in Engineering Data on Data Sheet (with no icing or
			condensation).
	Storage temperature		- 25 to 65 ° C (with no icing or condensation)
	Ambient operating humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)
			2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)
			1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2 , 3 times each in ± X, ± Y, ± Z directions
	Output indicator		Yes (Color: Green)
	EMI	Conducted	Conforms to EN 55011 Group 1 Class A and based on FCC Class A *9
		Emissions
		Radiated Emissions	Conforms to EN 55011 Group 1 Class A *9
	EMS	Electrostatic	Conforms to EN61000-4-2
		Discharge
		Radiated	Conforms to EN61000-4-3
		Electromagnetic
		Field
		Electrical Fast	Conforms to EN61000-4-4
		Transient/Burst
		Surge	Conforms to EN61000-4-5
		Conducted	Conforms to EN61000-4-6
		Disturbance
		Voltage Dips/Short	Conforms to EN61000-4-11
		Interruptions
	Approved standards *9		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition)
			cUL Listed: CSA C22.2 No.107.1
			cUR: CSA C22.2 No. 60950-1
			EN/VDE: EN50178 (= VDE 0160) Over voltage category III, EN 60950-1 (= VDE 0805
			Teil 1) (Terminal block: Based on DIN 50274 (VDE 0660-514))
	SEMI		SEMI F47-0200 (200-VAC input)
	Weight *8		300 g max.	550 g max.
Input specification			100/200 V switchable	100 to 240 V input
Power ratings *1			150 W at 5 V	150 W at 12 V	150 W at 24 or 48 V
Efficiency		5 V Models	78% min.	---	---
		12 V Models	---	79% min.	---
		24 V Models	---	---	86% min.
		48 V Models	---	---	85% min.
Input	Voltage *2		Switchable between 100 to 120 VAC	100 to 240 VAC
			(allowable range: 85 to 132 VAC) and	(allowable range: 85 to 264 VAC,
			200 to 240 VAC (allowable range: 170	80 to 370 VDC *9)
			to 264 VAC).
	Frequency *2		50/60 Hz (47 to 450 Hz)
	Current *3	100 V input	3.5 A max.	3.6 A max.	3.5 A max.
		200 V input	2.1 A max.	2.2 A max.	2.1 A max.
	Harmonic current emissions		---
	Leakage	100 V input	0.5 mA max.
	current *3	200 V input	1 mA max.
	Inrush current	100 V input	20 A max.
	(for a cold
	start at 25 °C)
	*3	200 V input	40 A max.
Output	Voltage adjustment range *5		- 10% to 15% (with V. ADJ) (48-V models: ± 10%)
*4	Ripple *3		2% (p-p) max.
	Input variation influence		0.4% max. (with AC input voltage)
	Load variation influence		0.8% max. (0 to 100% load, rated input voltage)
	Temperature variation influence		0.05%/ ° C max. (at rated input and output)
	Startup time		500 ms max. (up to 90% of output voltage at rated input and output)
	Hold time *3		20 ms min.
Additional	Overload protection *6		105% to 175% of rated load current,	105% to 175% of rated load current,
functions			voltage drop, automatic reset	voltage drop, intermittent, automatic
				reset
	Overvoltage protection *7		Yes
	Overheat protection		No
	Parallel operation		No (However, backup operation is possible; external diodes required.)
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Protective circuit operation indicator		No
Other	Ambient operating temperature		Refer to the derating curve in Engineering Data on Data Sheet (with no icing or
			condensation).
	Storage temperature		- 25 to 65 ° C (with no icing or condensation)
	Ambient operating humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)
			2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)
			1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2 , 3 times each in ± X, ± Y, ± Z directions
	Output indicator		Yes (Color: Green)
	EMI	Conducted	Conforms to EN 55011 Group 1 Class A and based on FCC Class A *9
		Emissions
		Radiated Emissions	Conforms to EN 55011 Group 1 Class A *9
	EMS	Electrostatic	Conforms to EN61000-4-2
		Discharge
		Radiated	Conforms to EN61000-4-3
		Electromagnetic
		Field
		Electrical Fast	Conforms to EN61000-4-4
		Transient/Burst
		Surge	Conforms to EN61000-4-5
		Conducted	Conforms to EN61000-4-6
		Disturbance
		Voltage Dips/Short	Conforms to EN61000-4-11
		Interruptions
	Approved standards *9		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition)
			cUL Listed: CSA C22.2 No.107.1
			cUR: CSA C22.2 No. 60950-1
			EN/VDE: EN50178 (= VDE 0160), Over voltage category III, EN 60950-1 (= VDE 0805
			Teil 1) (Terminal block: Based on DIN 50274 (VDE 0660-514))
	SEMI		---	SEMI F47-0200 (200-VAC input)
	Weight *8		800 g max.	700 g max.	600 g max.

*1.When a load is connected that has a built-in DC-DC converter, the overload protection may operate at startup and the Power Supply may not start. Refer to Overload Protection in Data Sheet.

*2.Do not use an Inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal temperature of the Power Supply may result in ignition or burning.

*3.Rated input voltage: 100 or 200 VAC at 100% load.

*4.Output characteristics: Specified at power supply output terminals.

*5.If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than the allowable voltage range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that load is not damaged.

*6.For details, refer to Overload Protection in Data Sheet.

*7.To reset the protection, turn OFF the input power for seven minutes or longer and then turn it back ON.

*8.The weight indicated is for Front-mounting, Open-frame Power Supply.

*9.The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).