EE-SPW411 Photoelectric Switch NEW

EE-SPW411 OMRON Photoelectric Switch NEW

OMRON Photoelectric Switch EE-SPW411               

Product Description:

Easy operation monitoring with bright light indicator.

Wide operating voltage range: 5 to 24 VDC

Light modulation effectively reduces external light interference.

Easy-to-wire connector assures ease of maintenance.

Specifications:

Models		EE-SPW311, EE-SPW411
Sensing distance		1 m
Sensing object		Opaque: 5 mm dia. min.
Directional angle		5 to 20 °
Light source		GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm
Indicator *1		Light indicator (red)
Supply voltage		5 ( -5%) to 24 (+10%) VDC, ripple (p-p): 5% max.
Current consumption		Emitter: 20 mA max., Receiver: 20 mA max.
Control output		NPN open collector:
		Load power supply voltage: 5 to 24 VDC
		Load current: 100 mA max.
		OFF current: 0.5 mA max.
		100 mA load current with a residual voltage of 0.8 V max.
		10 mA load current with a residual voltage of 0.4 V max.
Response frequency *2		100 Hz min.
Ambient illumination		3,000 lx max. with incandescent light on the surface of the receiver
Ambient temperature		Operating: - 10 to +55 ° C
range		Storage: - 25 to +65 ° C
Ambient humidity range		Operating: 5% to 85%
		Storage: 5% to 95%
Vibration resistance		Destruction: 200 to 2,000 Hz (peak acceleration: 100 m/s2)
		1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection		IEC IP60
Connecting method		Special connector (soldering not possible)
Weight (packaged)		Approx. 8.8 g
Material	Case	Polybutylene phthalate (PBT)
	Lens	Polycarbonate
Accessories		EE-1006L/D Connectors with Cables, Instruction Manual

*1.The indicator is a GaP red LED (peak wavelength: 700 nm).

*2.The response frequency was measured by detecting the following rotating disk.