E3S-2E41 2M Photoelectric Switch NEW

E3S-2E41 2M OMRON Photoelectric Switch NEW

OMRON Photoelectric Switch E3S-2E41     

Product Description:

Sensing method		Through-beam		Retro-reflective
Model		E3S-2E4	E3S-5E4	E3S-R2E4
		E3S-2E41	E3S-5E41	E3S-R2E41
Sensing distance		2 m	5 m	0.1 to 2 m
Standard sensing object		Opaque: 7-mm dia. min.	Opaque: 11-mm dia. min.	Opaque: 30-mm dia. min.
Differential travel		---
Directional angle		Both emitter and receiver: 3° to 10°		3° to 10°
Light source (wavelength)		Infrared LED (950 nm)
Power supply voltage		12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption		50 mA max. (Emitter: 25 mA max., Receiver: 25 mA max.)		40 mA max.
Control output		Output current: 1.5 to 4 mA, Load current: 80 mA max. (residual voltage: 2 V max.)
(solid-state output)		Refer to Data Sheet.
Response time		Operate or reset: 3 ms max.		Operate or reset: 1 ms max.
Sensitivity adjustment		With an indicator
Ambient illumination		Incandescent lamp: 3,000 lx max.
(Receiver side) *		Sunlight: 10,000 lx max.
Ambient temperature		Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		500 m/s2 3 times each in X, Y, and Z directions
Degree of protection		IEC IP65	IEC IP67
Connection method		Pre-wired cable (standard length: 2 m)
Indicators		Light indicator (red), Stability indicator (green)
Material	Case	Polybutylene terephthalate	Zinc die-cast
	Lens *	Polycarbonate
	Mounting Bracket	Iron

 

borde~?pa
0???+?windowtext .5pt; mso-border-bottom-alt:solid windowtext .5pt;mso-border-right-alt:solid windowtext .5pt; padding:0cm 5.4pt 0cm 5.4pt;height:22.5pt'>

Iron