E3JM-R4M4-G Photoelectric Switch NEW

E3JM-R4M4-G OMRON Photoelectric Switch NEW

OMRON Photoelectric Switch E3JM-R4M4-G     

Product Description:

E3JM Terminal Block Models

Easy to wire and adjust.

Specifications:

Sensing method		Through-beam model	Retro-reflective model	Diffuse-reflective model
			(with MSR function)
Model		E3JM-10[]4(T)-N	E3JM-R4[]4(T)	E3JM-DS70[]4(T)
Sensing distance		10 m	4 m (When using E39-R1)	White paper (200 × 200 mm): 700 mm
Standard sensing object		Opaque: 14.8-mm dia. min.	Opaque: 75-mm dia. min.	---
Differential travel		---		20% max. of sensing distance
Directional angle		Both Emitter and Receiver 3° to 20°	1° to 5°	---
Light source (wavelength)		Infrared LED (950 nm)	Red LED (660 nm)	Infrared LED (950 nm)
Power supply voltage		12 to 240 VDC±10%, ripple (p-p): 10% max.
		24 to 240 VAC±10%, 50/60 Hz
Power	DC	3 W max. (Emitter 1.5 W max.	2 W max.
consumption		Receiver 1.5 W max.)
	AC	3 W max. (Emitter 1.5 W max.	2 W max.
		Receiver 1.5 W max.)
Control output		Relay output (E3JM-[][]M4 (T) model): SPDT, 250 VAC, 3A (cosΦ =1) max., 5 VDC, 10 mA min.
		DC SSR output (E3JM-[][]S4 (T) model): 48 VDC, 100 mA max. (residual voltage: 2 V max.)
		Light-ON/Dark-ON selectable
Life	Mechanical	50,000,000 times min. (switching frequency: 18,000 times/h)
expectancy
(relay output)	Electrical	100,000 times min. (switching frequency: 1,800 times/h)
Response	Relay output	(E3JM-[][]M4 (T) models) Operate or reset: 30 ms max.
time	DC SSR output	(E3JM-[][]S4 (T) models) Operate or reset: 5 ms max.
Sensitivity adjustment		---		One-turn adjuster
Timer function *		ON-delay/OFF-delay/One-shot delay switch selectable
		Delay time: 0.1 to 5 s (adjustable), only for E3JM-[][][]4T
Ambient illumination		Incandescent lamp: 3,000 lx max.
(Receiver side)
Ambient temperature range		Operating: -25°C to 55°C, Storage: -30°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 45% to 85% (with no condensation), Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		2,000 VAC, 50/60 Hz for 1 min.
Vibration	Destruction	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock	Destruction	500 m/s2 3 times each in X, Y, and Z directions
resistance	Malfunction	100 m/s2 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529: IP66
Connection method		Terminal block
Weight (packed state)		Approx. 270 g	Approx. 160 g
Material	Case	ABS (Acrylonitril Butadiene Styrene)
	Lens	Methacrylic resin
	Cover	Polycarbonate
	Mounting Bracket	Iron
Accessories		Mounting Bracket (with screw), Nuts, Terminal Protection Cover, One set of cable connection nuts (excluding -US Models), Instruction manual, Reflector (E39-R1: only for Retro-reflective Sensors)