TL-W5MC2 Proximity Switch NEW

TL-W5MC2 OMRON Proximity Switch NEW

OMRON Proximity Switch TL-W5MC2                

Product Description:

Only 6 mm thick yet provides a sensing distance of 3 mm (TL-W3MC1).

Aluminum die-cast models also available.

Specifications:

Model		TL-W1R5MC1	TL-W3MC[]	TL-W5MC[]	TL-W5E1	TL-W20ME1
					TL-W5E2	TL-W20ME2
					TL-W5F1
					TL-W5F2
Sensing distance		1.5 mm ±10%	3 mm ±10%	5 mm ±10%		20 mm ±10%
Set distance		0 to 1.2 mm	0 to 2.4 mm	0 to 4 mm		0 to 16 mm
Differential travel		10% max. of sensing distance				1% to 15% of sensing
						distance
Detectable object		Ferrous metal
		(The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron,	Iron,	Iron,		Iron,
		8 × 8 × 1 mm	12 × 12 × 1 mm	18 × 18 × 1 mm		50 × 50 × 1 mm
Response frequency		1 kHz min.	600 Hz min.	500 Hz min.	300 Hz min.	40 Hz min.
Power supply voltage		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.			12 to 24 VDC (10 to	12 to 24 VDC
(operating voltage					30 VDC), ripple (p-p):	(10 to 30 VDC),
range)					20% max.	ripple (p-p): 10% max.
Current consumption		15 mA max. at 24 VDC (no-load)		10 mA max.	15 mA max. at 24	8 mA at 12 VDC,
					VDC (no-load)	15 mA at 24 VDC
Control	Load	NPN open collector		NPN open collector	200 mA	100 mA max.
output	current	100 mA max. at 30 VDC max.		50 mA max. at 12 VDC		at 12 VDC
				(30 VDC max.)		200 mA max.
				100 mA max. at 24 VDC		at 24 VDC
				(30 VDC max.)
	Residual	1 V max. (under load current of 100		1 V max. (under load	2 V max. (under load	1 V max. (under load
	voltage	mA with cable length of 2 m)		current of 50 mA with	current of 200 mA with	current of 200 mA with
				cable length of 2 m)	cable length of 2 m)	cable length of 2 m)
Indicators		Detection indicator (red)
Operation mode		NO	C1 Models: NO		E1/F1 Models: NO
(with sensing object			C2/B2 Models: NC		E2/F2 Models: NC
approaching)		Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuits		Reverse polarity protection, Surge suppressor
Ambient temperature		Operating/Storage: -25 to 70°C (with no icing or condensation) *
range
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±2.5% max. of sensing distance at		±2.5% max. of sensing	±2.5% max. of sensing distance at rated voltage
		rated voltage in the rated voltage		distance at rated voltage	in the rated voltage ±10% range
		±10% range		in the rated voltage
				±20% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 3 times each in X, Y, and Z directions				Destruction: 500 m/s2
						10 times each in X, Y,
						and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant *
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 30 g		Approx. 45 g	Approx. 70 g	Approx. 180 g
Materials	Case	Heat-resistant ABS			Aluminum die-cast	Heat-resistant ABS
	Sensing	Heat-resistant ABS
	surface
Accessories		Mounting Bracket,		Instruction manual
		Instruction manual

For environments that require oil resistance, the upper limit of the ambient operating temperature range is 40°C.