E2EQ-X3D1-M1GJ Proximity Switch NEW

E2EQ-X3D1-M1GJ OMRON Proximity Switch NEW

Product Description:

Superior spatter resistance.

Long Sensing-distance Models added for sensing distances up to 15 mm.

Pre-wired Smartclick Connector Models are also available.

Specifications:

Model		E2EQ-X3D1	E2EQ-X7D1	E2EQ-X10D1
		E2EQ-X3D1-M1(T)GJ	E2EQ-X7D1-M1(T)GJ	E2EQ-X10D1-M1(T)GJ
Sensing distance		3 mm ±10%	7 mm ±10%	10 mm ±10%
Set distance		0 to 2.4 mm	0 to 5.6 mm	0 to 8 mm
Differential travel		10% max. of sensing distance
Standard sensing object		Iron, 12 × 12 × 1 mm	Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm
Response frequency *		1 kHz	500 Hz	400 Hz
Control output	Load current	3 to 100 mA
	Residual voltage	3 V max. (Load current: 100 mA, Cable length: 2 m)
Operation mode (with sensing object		Load ON: NO; For details, refer to the timing charts on Data Sheet.
approaching)
Protection circuits		Load short-circuit protection, Surge suppressor
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Connection method		E2EQ-X@D1: Pre-wired Models (Standard cable length: 2 m)
		E2EQ-X@D1-M1GJ: Pre-wired Connector Models (Standard cable length: 300mm)
Weight	Pre-wired Models	Approx. 120 g	Approx. 160 g	Approx. 220 g
(packed state)	Pre-wired	Approx. 80 g	Approx. 110 g	Approx. 190 g
	Connector Models

*The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.