TL-W3MB1 Flat Inductive Proximity Sensor NEW

TL-W3MB1 Omron Flat Inductive Proximity Sensor NEW

Product Description:

Standard Flat Sensors in Many Different Variations

• Only 6 mm thick yet provides a sensing distance of 3 mm (TL-W3MC1).

• Aluminum die-cast models also available.

Specifications

Model Item		TL-W1R5MC1	TL-W3MB/C?		TL-W5MB/C?	TL-W5E1, TL-W5E2 TL-W5F1, TL-W5F2	TL-W20ME1 TL-W20ME2
Sensing distance		1.5 mm ±10%	3 mm ±10%		5 mm ±10%		20 mm ±10%
Set distance		0 to 1.2 mm	0 to 2.4 mm		0 to 4 mm		0 to 16 mm
Differential travel		10% max. of sensing distance					1% to 15% of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 5.)
Standard sensing object		Iron, 8 × 8 × 1 mm	Iron, 12 × 12 × 1 mm		Iron, 18 × 18 × 1 mm		Iron, 50 × 50 × 1mm
Response frequency		1 kHz min.	600 Hz min.		500 Hz min.	300 Hz min.	40 Hz min.
Power supply volt­age (operating volt­age range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.				12 to 24 VDC (10 to 30 VDC), ripple (p-p): 20% max.	12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption		15 mA max. at 24 VDC (no-load)		10 mA max.		15 mA max. at 24 VDC (no-load)	8 mA at 12 VDC, 15 mA at 24 VDC
Control output	Load current	NPN open collector 100 mA max. at 30 VDC max.		NPN open collector 50 mA max. at 12 VDC (30 VDC max.) 100 mA max. at 24 VDC (30 VDC max.)		200 mA	100 mA max. at 12 VDC 200 mA max. at 24 VDC
	Residual voltage	1 V max. (under load current of 100 mA with cable length of 2 m)		1 V max. (under load current of 50 mA with cable length of 2 m)		2 V max. (under load current of 200 mA with cable length of 2 m)	1 V max. (under load current of 200 mA with ca­ble length of 2 m)
Indicators		Detection indicator (red)
Operation mode (with sensing ob­ject approaching)		NO	C1 Models: NO C2/B2 Models: NC			E1/F1 Models: NO E2/F2 Models: NC
		Refer to the timing charts under I/O Circuit Diagrams on page 6 for details.
Protection circuits		Reverse polarity protection, Surge suppressor
Ambient temperature range		Operating/Storage: −25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
Voltage influence		±2.5% max. of sensing distance at rated volt­age in the rated voltage ±10% range			±2.5% max. of sens­ing distance at rated voltage in the rated voltage ±20% range	±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range
Insulation resistance		50 M? min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 3 times each in X, Y, and Z directions					Destruction: 500 m/s2 10 times each in X, Y, and Z direc­tions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 30 g			Approx. 45 g	Approx. 70 g	Approx. 180 g
Materi­als	Case	Heat-resistant ABS				Aluminum die-cast	Heat-resistant ABS
	Sensing surface	Heat-resistant ABS
Accessories		Mounting Bracket, Instruction manual			Instruction manual