No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
EE-SX772 Photomicrosensor NEWEE-SX772 Omron Photomicrosensor NEWProduct Description:
Thin, Compact Photomicrosensor with Attached Cable
Next generation design available with NPN or PNP output
Allows standard M3-screw mounting
Twenty-four models available in standard, L-shaped, and T-shaped
UL, EMC and CE approvals
Each model equipped with a flexible cable that conforms to machine contours
Compact size allows high-density mounting
Indicators are visible from both sides
Readily-visible, molded workpiece insertion mark allows fine-tuning of sensing position.
Specifications:
Type
Standard
L-shaped
T-shaped
Item
NPN models
EE-SX770/EE-SX870 EE-SX770A/EE-SX870A
EE-SX771/EE-SX871 EE-SX771A/EE-SX871A
EE-SX772/EE-SX872 EE-SX772A/EE-SX872A
PNP models
EE-SX770P/EE-SX870P EE-SX770R/EE-SX870R
EE-SX771P/EE-SX871P EE-SX771R/EE-SX871R
EE-SX772P/EE-SX872P EE-SX772R/EE-SX872R
Sensing distance
5 mm (slot width)
Sensing object
Opaque: 2 × 0.8 mm min.
Differential distance
0.025 mm
Light source
GaAs infrared LED with a peak wavelength of 940 nm
Indicator
Light indicator (red) (turns ON when light is interrupted for models with A or R suffix)
Supply voltage
5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption
35 mA max. (NPN models), 30 mA max. (PNP models)
Control output
NPN open collector: 5 to 24 VDC, 100 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max. PNP open collector: 5 to 24 VDC, 50 mA max. 50 mA load current with a residual voltage of 1.3 V max.
Response frequency *
1 kHz min. (3 kHz average)
Ambient illumination
1,000 lx max. with fluorescent light on the surface of the receiver
Ambient temperature range
Operating: −25 to +55°C Storage: −30 to +80°C (with no icing)
Ambient humidity range
Operating: 5% to 85% Storage: 5% to 95% (with no condensation)
Vibration resistance
Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2) 1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Enclosure rating
IEC60529 IP60
Connecting method
Pre-wired (standard cable length: 2 m)
Weight (packaged)
Approx. 20 g
Material
Case: Polybutylene phthalate (PBT)
No comment |