No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
E3Z-B86 Photoelectric Sensors NEWE3Z-B86 Omron Photoelectric Sensors NEWProduct Description:
Reliable Detection of Transparent Objects, Including Thin-walled Clear, Plastic Bottles
• Uses OMRON's unique optical system ("Inner View") that can detect various shapes of clear, plastic bottles.
• Detects a wide range of bottles from 500-ml bottles to 2-l bottles and from single bottles to sets of stocked bottles.
• Provides a high degree of protection (IP67), mutual interference prevention, and EN standard compliance.
Specifications:
Sensing method
Retro-reflective (without MSR function)
Model
NPN output
E3Z-B61
E3Z-B66
E3Z-B62
E3Z-B67
Item
PNP output
E3Z-B81
E3Z-B86
E3Z-B82
E3Z-B87
Sensing distance *1
500 mm (80 mm) *2 (using E39-R1S)
2 m (500 mm) *2 (using E39-R1S)
Standard sensing object
500-ml (65-mm dia.) transparent round plastic bottles
Light source (wavelength)
Red LED (680 mm)
Power supply voltage
12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption
30 mA max.
Control output
Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max. Open collector output (NPN/PNP depending on model) Light-ON/Dark-ON selectable
Protection circuits
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection
Response time
Operate or reset: 1 ms max.
Sensitivity adjustment
One-turn adjuster
Ambient illumination (Receiver side)
Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature range
Operating: −25 to 55°C, Storage:−40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance
20 M? min. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection
IP67 (IEC60529)
Connection method
Pre-wired cable (standard length: 2 m and 0.5 m)
Connector (M8, 4 pins)
Pre-wired cable (standard length: 2 m and 0.5 m)
Connector (M8, 4 pins)
Indicator
Operation indicator (orange) Stability indicator (green)
Weight (packed state)
Pre-wired cable (2 m)
Approx. 65 g
Standard Connector
Approx. 20 g
Material
Case
PBT (polybutylene terephthalate)
Lens
Modified polyarylate
Accessories
Instruction manual (The Reflector or Mounting Bracket are ordered separately.)
No comment |