E3S-LS20XB4 Photoelectric Switch NEW

E3S-LS20XB4 Omron Photoelectric Sensors NEW

Product Description:

Focusable Sensors with Built-in DC Amplifiers

· Pinpoint focusable and area focusable models eliminate background objects.

· Ideal for precise detection of level/height, edges, small holes and openings, objects touching one another, objects inside transparent covers..

Specifications:

Item	Model	E3S-GS3E4
Sensing distance		30 mm
Standard sensing object		Opaque, 6-mm dia. min.
Minimum detectable object		3-mm dia. min. (black mark on transparent sheet)
Light source (wavelength)		Infrared LED (950 nm)
Power supply voltage		12 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption		40 mA max.
Control output		Load power supply voltage: 24 VDC max., Load current: 80 mA max. (residual voltage: 1.5 V max.); NPN voltage output; Light-ON/Dark-ON mode selector
Protection circuits		Power supply reverse polarity, Output short-circuit protection
Response time		Operate or reset: 1 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature		Operating: −25 to 55°C (with no icing or condensation) Storage: −40 to 70°C (with no icing or condensation)
Ambient humidity		Operating: 35% to 85% (with no condensation) Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. (at 500 VDC)
Dielectric strength		1,000 VAC at 50/60 Hz for 1 min
Vibration resistance (destruction)		10 to 55 Hz with a 1.5-mm double amplitude for 2 h each in X, Y and Z directions
Shock resistance (destruction)		500 m/s2, for 3 times each in X, Y and Z directions
Degree of protection		IEC IP67
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 330 g
Materials	Case	Zinc die-cast
	Lens	Polycarbonate
	Indicator window	Polycarbonate